I've installed KnoppMyth (V4R3) and I thought I had it working with my PVR-350, but I have this weird problem where I set it up to record multiple shows, and it will record the first show, but it doesn't record the other ones. If I try to watch TV after all of the shows should be done recording it says that the tunner is busy, and if I try to use the guide it says that there is no backend. Here are the logs, I'm not sure what I'm looking for, but the look fine.

mythbackend.log

QSettings: error creating /.qt
QSettings::sync: filename is null/empty
QSettings: error creating /.qt
QSettings::sync: filename is null/empty
QSettings: error creating /.qt
QSettings::sync: filename is null/empty
QSettings: error creating /.qt
QSettings::sync: filename is null/empty
QSettings: error creating /.qt
QSettings::sync: filename is null/empty
QSettings: error creating /.qt
QSettings::sync: filename is null/empty
Starting up as the master server.
QSettings: error creating /.qt
QSettings::sync: filename is null/empty
2004-05-15 19:52:45 mythbackend version: 0.14.20040123-1 www.mythtv.org
2004-05-15 19:52:45 Enabled verbose msgs : important general
2004-05-15 19:52:48 Found changes in the todo list.
2004-05-15 20:05:23 MainServer::HandleAnnounce Playback
2004-05-15 20:05:23 adding: mythtv as a client (events: 0)
2004-05-15 20:05:23 MainServer::HandleAnnounce Playback
2004-05-15 20:05:23 adding: mythtv as a client (events: 1)
2004-05-15 20:06:29 Found changes in the todo list.
2004-05-15 20:06:29 Started recording "Horsepower TV" on channel: 3032 on cardid: 2, sourceid 3
2004-05-15 20:06:29 Changing from None to RecordingOnly
2004-05-15 20:06:37 Found changes in the todo list.
2004-05-15 20:06:45 Found changes in the todo list.
2004-05-15 20:30:00 Changing from RecordingOnly to None
2004-05-15 20:30:00 Found changes in the todo list.


messages

May 15 19:52:41 mythtv kernel: ivtv: Encoder revision: 0x02040011
May 15 19:52:41 mythtv kernel: ivtv: Decoder revision: 0x02020023
May 15 19:52:41 mythtv kernel: ivtv: Registered v4l2 device, minor 0
May 15 19:52:41 mythtv kernel: ivtv: Registered v4l2 device, minor 32
May 15 19:52:41 mythtv kernel: ivtv: Registered v4l2 device, minor 224
May 15 19:52:41 mythtv kernel: ivtv: Registered v4l2 device, minor 16
May 15 19:52:41 mythtv kernel: ivtv: loaded
May 15 19:52:41 mythtv kernel: lirc_dev: IR Remote Control driver registered, at major 61
May 15 19:52:42 mythtv kernel: bttv: driver version 0.9.12 loaded
May 15 19:52:42 mythtv kernel: bttv: using 8 buffers with 2080k (520 pages) each for capture
May 15 19:52:42 mythtv kernel: lirc_i2c: chip found @ 0x18 (Hauppauge IR)
May 15 19:52:42 mythtv kernel: lirc_dev: lirc_register_plugin:sample_rate: 10
May 15 19:52:42 mythtv kernel: saa7115[0]: decoder set size
May 15 19:52:42 mythtv kernel: Setting full NTSC width
May 15 19:52:42 mythtv kernel: Setting full NTSC height
May 15 19:52:46 mythtv kernel: apm: BIOS version 1.2 Flags 0x0b (Driver version 1.16)
May 15 20:06:29 mythtv kernel: saa7115[0]: decoder set size
May 15 20:06:29 mythtv kernel: Hpsc: 0x00001, Hfsc: 0x00600
May 15 20:06:29 mythtv kernel: Setting full NTSC height
May 15 20:06:33 mythtv kernel: spurious 8259A interrupt: IRQ7.
May 15 20:32:32 mythtv -- MARK --
May 15 20:52:32 mythtv -- MARK --
May 15 21:12:32 mythtv -- MARK --
May 15 21:32:32 mythtv -- MARK --
May 15 21:52:32 mythtv -- MARK --
May 15 22:12:32 mythtv -- MARK --
May 15 22:32:32 mythtv -- MARK --
May 15 22:52:32 mythtv -- MARK --
May 15 23:12:32 mythtv -- MARK --
May 15 23:32:32 mythtv -- MARK --
May 15 23:52:32 mythtv -- MARK --


syslog

May 15 20:06:29 mythtv kernel: saa7115[0]: decoder set size
May 15 20:06:29 mythtv kernel: Hpsc: 0x00001, Hfsc: 0x00600
May 15 20:06:29 mythtv kernel: Setting full NTSC height
May 15 20:06:30 mythtv kernel: saa7115[0]: decoder disable output
May 15 20:06:30 mythtv kernel: saa7115[0]: decoder enable output
May 15 20:06:33 mythtv kernel: spurious 8259A interrupt: IRQ7.
May 15 20:10:01 mythtv /USR/SBIN/CRON[912]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck)
May 15 20:20:01 mythtv /USR/SBIN/CRON[920]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck)
May 15 20:30:01 mythtv /USR/SBIN/CRON[928]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck)
May 15 20:35:01 mythtv /USR/SBIN/CRON[936]: (root) CMD (nice -n 19 /usr/local/bin/mythlink.sh)
May 15 20:40:01 mythtv /USR/SBIN/CRON[942]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck)
May 15 20:50:01 mythtv /USR/SBIN/CRON[950]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck)
May 15 21:00:01 mythtv /USR/SBIN/CRON[958]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck)
May 15 21:05:01 mythtv /USR/SBIN/CRON[966]: (root) CMD (nice -n 19 /usr/local/bin/mythlink.sh)
May 15 21:10:01 mythtv /USR/SBIN/CRON[972]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck)
May 15 21:20:01 mythtv /USR/SBIN/CRON[980]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck)
May 15 21:30:01 mythtv /USR/SBIN/CRON[988]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck)
May 15 21:35:01 mythtv /USR/SBIN/CRON[996]: (root) CMD (nice -n 19 /usr/local/bin/mythlink.sh)
May 15 21:40:01 mythtv /USR/SBIN/CRON[1002]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck)
May 15 21:50:01 mythtv /USR/SBIN/CRON[1010]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck)
May 15 22:00:01 mythtv /USR/SBIN/CRON[1018]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck)
May 15 22:05:01 mythtv /USR/SBIN/CRON[1026]: (root) CMD (nice -n 19 /usr/local/bin/mythlink.sh)
May 15 22:10:01 mythtv /USR/SBIN/CRON[1032]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck)
May 15 22:20:01 mythtv /USR/SBIN/CRON[1040]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck)
May 15 22:30:01 mythtv /USR/SBIN/CRON[1048]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck)
May 15 22:35:01 mythtv /USR/SBIN/CRON[1056]: (root) CMD (nice -n 19 /usr/local/bin/mythlink.sh)
May 15 22:40:01 mythtv /USR/SBIN/CRON[1062]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck)
May 15 22:50:01 mythtv /USR/SBIN/CRON[1070]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck)
May 15 23:00:01 mythtv /USR/SBIN/CRON[1078]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck)
May 15 23:05:01 mythtv /USR/SBIN/CRON[1086]: (root) CMD (nice -n 19 /usr/local/bin/mythlink.sh)
May 15 23:10:01 mythtv /USR/SBIN/CRON[1092]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck)
May 15 23:20:01 mythtv /USR/SBIN/CRON[1100]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck)
May 15 23:30:01 mythtv /USR/SBIN/CRON[1108]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck)
May 15 23:35:01 mythtv /USR/SBIN/CRON[1116]: (root) CMD (nice -n 19 /usr/local/bin/mythlink.sh)
May 15 23:40:01 mythtv /USR/SBIN/CRON[1122]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck)
May 15 23:50:01 mythtv /USR/SBIN/CRON[1130]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck)
May 16 00:00:01 mythtv /USR/SBIN/CRON[1139]: (root) CMD ([ -d /etc/shaper ] && /etc/init.d/shaper timecheck)


Sorry for the huge post, but I'm loosing my mind. Any sugestions?

what's the mythlink.sh stuff is that something you setup, or is that on by default in R4V3?

I didn't set that up, so it must be there by default.