hello all,
**I AM UNABLE TO WATCH TV** I select tv and it goes back to the main page.

I am in the midst of setting up a Knoppmyth system.

I am using a Avermedia M150-D on a under-equipped system.

COMPUTER SPECS:

350mhz processor
i believe 512 mb ram
its a gateway motherboard, so i dont have any specifics
video card is ATI

TUNER CARD:

Avermedia M150-D
card is labeled with two chips:
Conexant Broadcast Decorder Cx23880-19
Conexant MPEG II A/V Encoder CX23416-12

i want to set this machine up as a trial to make sure this config will work. then i will buy a more fitting machine

LOGS**

/var/log/dmesg:

i believe this site truncated my post, if you are missing something let me know and i will post that section or i can host the log someplace else.

i ran this command:

tail -200 /home/mythtv/.xsession-errors | more

this was the output:

Setting default value
Failed to read: session.appsFile
Setting default value
Failed to read: session.tabsAttachArea
Setting default value
Failed to read: session.useMod1
Setting default value
Failed to read: session.screen0.opaqueMove
Setting default value
Failed to read: session.screen0.autoRaise
Setting default value
Failed to read: session.screen0.clickRaises
Setting default value
Failed to read: session.screen0.decorateTransient
Setting default value
Failed to read: session.screen0.resizeMode
Setting default value
Failed to read: session.screen0.windowMenu
Setting default value
Failed to read: session.screen0.tabFocusModel
Setting default value
Failed to read: session.screen0.followModel
Setting default value
Failed to read: session.screen0.window.focus.alpha
Setting default value
Failed to read: session.screen0.window.unfocus.alpha
Setting default value
Failed to read: session.screen0.menu.alpha
Setting default value
Failed to read: session.screen0.menuDelay
Setting default value
Failed to read: session.screen0.menuDelayClose
Setting default value
Failed to read: session.screen0.menuMode
Setting default value
Failed to read: session.screen0.overlay.lineWidth
Setting default value
Failed to read: session.screen0.overlay.lineStyle
Setting default value
Failed to read: session.screen0.overlay.joinStyle
Setting default value
Failed to read: session.screen0.overlay.capStyle
Setting default value
Failed to read: session.screen0.windowScrollAction
Setting default value
Failed to read: session.screen0.windowScrollReverse
Setting default value
Failed to read: session.ignoreBorder
Setting default value
Failed to read: session.forcePseudoTransparency
Setting default value
Failed to read: session.numLayers
Setting default value
Failed to read: session.tabPadding
Setting default value
Failed to read: session.focusTabMinWidth
Setting default value
Failed to read: session.appsFile
Setting default value
Failed to read: session.tabsAttachArea
Setting default value
Failed to read: session.useMod1
Setting default value
Failed to read: session.screen0.opaqueMove
Setting default value
Failed to read: session.screen0.autoRaise
Setting default value
Failed to read: session.screen0.clickRaises
Setting default value
Failed to read: session.screen0.decorateTransient
Setting default value
Failed to read: session.screen0.resizeMode
Setting default value
Failed to read: session.screen0.windowMenu
Setting default value
Failed to read: session.screen0.tabFocusModel
Setting default value
Failed to read: session.screen0.followModel
Setting default value
Failed to read: session.screen0.window.focus.alpha
Setting default value
Failed to read: session.screen0.window.unfocus.alpha
Setting default value
Failed to read: session.screen0.menu.alpha
Setting default value
Failed to read: session.screen0.menuDelay
Setting default value
Failed to read: session.screen0.menuDelayClose
Setting default value
Failed to read: session.screen0.menuMode
Setting default value
Failed to read: session.screen0.overlay.lineWidth
Setting default value
Failed to read: session.screen0.overlay.lineStyle
Setting default value
Failed to read: session.screen0.overlay.joinStyle
Setting default value
Failed to read: session.screen0.overlay.capStyle
Setting default value
Failed to read: session.screen0.windowScrollAction
Setting default value
Failed to read: session.screen0.windowScrollReverse
Setting default value
PORT=5900
Failed to read: session.screen0.slit.maxOver
Setting default value
Failed to read: session.screen0.slit.alpha
Setting default value
Failed to read: session.screen0.slit.layer
Setting default value
2007-01-28 12:54:47.130 Using runtime prefix = /usr
2007-01-28 12:54:47.194 DPMS is disabled.
2007-01-28 12:54:47.543 New DB connection, total: 1
2007-01-28 12:54:47.678 Connected to database 'mythconverg' at host: localhost
2007-01-28 12:54:47.687 Total desktop dim: 1280x1024, with 1 screen[s].
2007-01-28 12:54:47.704 Using screen 0, 1280x1024 at 0,0
Failed to read: session.screen0.toolbar.maxOver
Setting default value
Failed to read: session.screen0.toolbar.visible
Setting default value
Failed to read: session.screen0.toolbar.alpha
Setting default value
Failed to read: session.screen0.toolbar.layer
Setting default value
Failed to read: session.screen0.toolbar.height
Setting default value
Failed to read: session.screen0.toolbar.tools
Setting default value
Failed to read: session.screen0.iconbar.mode
Setting default value
Failed to read: session.screen0.iconbar.deiconifyMode
Setting default value
Failed to read: session.screen0.iconbar.wheelMode
Setting default value
Failed to read: session.screen0.iconbar.alignment
Setting default value
Failed to read: session.screen0.iconbar.iconWidth
Setting default value
Failed to read: session.screen0.iconbar.iconTextPadding
Setting default value
Failed to read: session.screen0.iconbar.usePixmap
Setting default value
2007-01-28 12:54:48.830 Current Schema Version: 1160
2007-01-28 12:54:48.831 mythfrontend version: 0.20.20060828-3 www.mythtv.org
2007-01-28 12:54:48.833 Enabled verbose msgs: important general
2007-01-28 12:54:55.240 Total desktop dim: 1280x1024, with 1 screen[s].
2007-01-28 12:54:55.246 Using screen 0, 1280x1024 at 0,0
2007-01-28 12:54:55.249 Switching to square mode (Titivillus)
2007-01-28 12:54:55.930 Using the Qt painter
mythtv: could not connect to socket
mythtv: No such file or directory
lirc_init failed for mythtv, see preceding messages
Could not initialize /dev/input/js0
open: No such file or directory
ioctl JSIOCGAXES: Bad file descriptor
2007-01-28 12:54:58.599 Loading from: /usr/share/mythtv/themes/default/base.xml
2007-01-28 12:55:02.001 Registering Internal as a media playback plugin.
2007-01-28 12:55:02.605 Registering MythDVD DVD Media Handler as a media handler
ext()
2007-01-28 12:55:02.611 Mediamonitor: Adding /dev/cdrom
no record for '/block/hdc/device' in database
no record for '/block/hdc/holders' in database
no record for '/block/hdc/queue' in database
no record for '/block/hdc/slaves' in database
no record for '/block/hdc/subsystem' in database
no record for '/block/hdd/device' in database
no record for '/block/hdd/holders' in database
no record for '/block/hdd/queue' in database
no record for '/block/hdd/slaves' in database
no record for '/block/hdd/subsystem' in database
2007-01-28 12:55:02.926 Mediamonitor: AddDevice() -- Not adding '/dev/hdd', it a
ppears to be a duplicate.
2007-01-28 12:55:02.948 Registering MythDVD VCD Media Handler as a media handler
ext()
2007-01-28 12:55:03.375 Registering MythGallery Media Handler 1/2 as a media han
dler ext()
2007-01-28 12:55:03.376 Registering MythGallery Media Handler 2/2 as a media han
dler ext(gif,jpg,png)
2007-01-28 12:55:03.377 MonitorRegisterExtensions(0x100, gif,jpg,png)
Failed to run 'cdrecord --scanbus'
2007-01-28 12:55:06.939 Registering MythMusic Media Handler 1/2 as a media handl
er ext()
2007-01-28 12:55:06.940 Registering MythMusic Media Handler 2/2 as a media handl
er ext(ogg,mp3,aac,flac)
2007-01-28 12:55:06.941 MonitorRegisterExtensions(0x40, ogg,mp3,aac,flac)
SIP listening on IP Address 192.168.1.6:5060 NAT address 192.168.1.6
SIP: Cannot register; proxy, username or password not set
2007-01-28 12:55:12.640 Starting media monitor.
2007-01-28 12:55:12.648 NetworkControl: Listening for remote connections on port
6546
2007-01-28 12:55:13.053 Executing '/usr/bin/pmount /dev/hdc'
mount: No medium found
2007-01-28 12:55:14.860 Failed to mount /dev/hdc.
2007-01-28 12:55:14.866 Media status changed... New status is: MEDIASTAT_NOTMOU
NTED old status was MEDIASTAT_UNPLUGGED
2007-01-28 12:56:13.263 New DB connection, total: 2
2007-01-28 12:56:13.820 Connected to database 'mythconverg' at host: localhost
2007-01-28 12:56:14.452 Connecting to backend server: 127.0.0.1:6543 (try 1 of 5
)
2007-01-28 12:56:14.546 Using protocol version 31
2007-01-28 12:56:14.695 TV: Attempting to change from None to WatchingLiveTV
2007-01-28 12:56:17.696 RemoteEncoder::openControlSocket(): Connection timed out
.
2007-01-28 12:56:17.736 GetEntryAt(-1) failed.
2007-01-28 12:56:17.786 EntryToProgram(0@Wed Dec 31 16:00:00 1969) failed to get
pginfo
2007-01-28 12:56:17.787 TV Error: LiveTV not successfully started
2007-01-28 12:56:17.787 TV Error: LiveTV not successfully started
2007-01-28 12:56:17.791 TV: Deleting TV Chain in destructor
2007-01-28 12:58:59.218 XMLParse::LoadTheme using /usr/share/mythtv/themes/Titiv
illus/ui.xml
2007-01-28 12:59:19.629 XMLParse::LoadTheme using /usr/share/mythtv/themes/Titiv
illus/ui.xml
2007-01-28 12:59:51.686 XMLParse::LoadTheme using /usr/share/mythtv/themes/Titiv
illus/ui.xml

Where you able to setup the tuner in the backend?
See here:
http://www.mythtv.org/wiki/index.php/Us ... e_TV_cards
for more info.

Have you tried going through the steps to troubleshoot that are on the wiki?
http://www.knoppmythwiki.org/index.php? ... WatchingTV

yes, and thank you for your reply. i have been trying the information supplied in both links.

I have figured out this is a V4L card.

I pulled up some logs and would like someone to take a look at them. I believe its saying my card is not being recognized. Although it says the drivers are loaded on the second line.

Also I am doing at this step: http://www.knoppmythwiki.org/index.php?page=CompileIvtv

And it says to look for a file similar to kernel-source-2.6.13.2-chw-3, all I see is linux-headers-2.6.18-chw-13. Are these similar files or no?

--------------------------------------------
Linux video capture interface: v2.00
cx2388x v4l2 driver version 0.0.6 loaded
PCI: Found IRQ 9 for device 0000:00:0f.0
PCI: Sharing IRQ 9 with 0000:00:0f.1
PCI: Sharing IRQ 9 with 0000:00:0f.2
cx88[0]: quirk: PCIPCI_NATOMA -- set TBFX
cx88[0]: Your board isn't known (yet) to the driver. You can
cx88[0]: try to pick one of the existing card configs via
cx88[0]: card=<n> insmod option. Updating to the latest
cx88[0]: version might help as well.
cx88[0]: Here is a list of valid choices for the card=<n> insmod option:
cx88[0]: card=0 -> UNKNOWN/GENERIC
cx88[0]: card=1 -> Hauppauge WinTV 34xxx models
cx88[0]: card=2 -> GDI Black Gold
cx88[0]: card=3 -> PixelView
cx88[0]: card=4 -> ATI TV Wonder Pro
cx88[0]: card=5 -> Leadtek Winfast 2000XP Expert
cx88[0]: card=6 -> AverTV Studio 303 (M126)
cx88[0]: card=7 -> MSI TV-@nywhere Master
cx88[0]: card=8 -> Leadtek Winfast DV2000
cx88[0]: card=9 -> Leadtek PVR 2000
cx88[0]: card=10 -> IODATA GV-VCP3/PCI
cx88[0]: card=11 -> Prolink PlayTV PVR
cx88[0]: card=12 -> ASUS PVR-416
cx88[0]: card=13 -> MSI TV-@nywhere
cx88[0]: card=14 -> KWorld/VStream XPert DVB-T
cx88[0]: card=15 -> DViCO FusionHDTV DVB-T1
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda1, internal journal
ext3_orphan_cleanup: deleting unreferenced inode 276872
ext3_orphan_cleanup: deleting unreferenced inode 276871
ext3_orphan_cleanup: deleting unreferenced inode 276870
ext3_orphan_cleanup: deleting unreferenced inode 276869
ext3_orphan_cleanup: deleting unreferenced inode 276868
EXT3-fs: hda1: 5 orphan inodes deleted
EXT3-fs: recovery complete.
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 268k freed
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 440BX Chipset.
agpgart: AGP aperture is 64M @ 0xf8000000
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v3.0
PCI: setting IRQ 9 as level-triggered
PCI: Found IRQ 9 for device 0000:00:07.2
PCI: Sharing IRQ 9 with 0000:00:10.0
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:07.2: irq 9, io base 0x00001040
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
piix4_smbus 0000:00:07.3: Found 0000:00:07.3 device
Linux video capture interface: v2.00
cx2388x v4l2 driver version 0.0.6 loaded
PCI: Found IRQ 9 for device 0000:00:0f.0
PCI: Sharing IRQ 9 with 0000:00:0f.1
PCI: Sharing IRQ 9 with 0000:00:0f.2
cx88[0]: quirk: PCIPCI_NATOMA -- set TBFX
cx88[0]: Your board isn't known (yet) to the driver. You can
cx88[0]: try to pick one of the existing card configs via
cx88[0]: card=<n> insmod option. Updating to the latest
cx88[0]: version might help as well.
cx88[0]: Here is a list of valid choices for the card=<n> insmod option:
cx88[0]: card=0 -> UNKNOWN/GENERIC
cx88[0]: card=1 -> Hauppauge WinTV 34xxx models
cx88[0]: card=2 -> GDI Black Gold
cx88[0]: card=3 -> PixelView
cx88[0]: card=4 -> ATI TV Wonder Pro
cx88[0]: card=5 -> Leadtek Winfast 2000XP Expert
cx88[0]: card=6 -> AverTV Studio 303 (M126)
cx88[0]: card=7 -> MSI TV-@nywhere Master
cx88[0]: card=8 -> Leadtek Winfast DV2000
cx88[0]: card=9 -> Leadtek PVR 2000
cx88[0]: card=10 -> IODATA GV-VCP3/PCI
cx88[0]: card=11 -> Prolink PlayTV PVR
cx88[0]: card=12 -> ASUS PVR-416
cx88[0]: card=13 -> MSI TV-@nywhere
cx88[0]: card=14 -> KWorld/VStream XPert DVB-T
cx88[0]: card=15 -> DViCO FusionHDTV DVB-T1
cx88[0]: card=16 -> KWorld LTV883RF
cx88[0]: card=17 -> DViCO FusionHDTV 3 Gold-Q
cx88[0]: card=18 -> Hauppauge Nova-T DVB-T
cx88[0]: card=19 -> Conexant DVB-T reference design
cx88[0]: card=20 -> Provideo PV259
cx88[0]: card=21 -> DViCO FusionHDTV DVB-T Plus
cx88[0]: card=22 -> pcHDTV HD3000 HDTV
cx88[0]: card=23 -> digitalnow DNTV Live! DVB-T
cx88[0]: card=24 -> Hauppauge WinTV 28xxx (Roslyn) models
cx88[0]: card=25 -> Digital-Logic MICROSPACE Entertainment Center (MEC)
cx88[0]: card=26 -> IODATA GV/BCTV7E
cx88[0]: card=27 -> PixelView PlayTV Ultra Pro (Stereo)
cx88[0]: card=28 -> DViCO FusionHDTV 3 Gold-T
cx88[0]: card=29 -> ADS Tech Instant TV DVB-T PCI
cx88[0]: card=30 -> TerraTec Cinergy 1400 DVB-T
cx88[0]: card=31 -> DViCO FusionHDTV 5 Gold
cx88[0]: card=32 -> AverMedia UltraTV Media Center PCI 550
cx88[0]: card=33 -> Kworld V-Stream Xpert DVD
cx88[0]: card=34 -> ATI HDTV Wonder
cx88[0]: card=35 -> WinFast DTV1000-T
cx88[0]: card=36 -> AVerTV 303 (M126)
cx88[0]: card=37 -> Hauppauge Nova-S-Plus DVB-S
cx88[0]: card=38 -> Hauppauge Nova-SE2 DVB-S
cx88[0]: card=39 -> KWorld DVB-S 100
cx88[0]: card=40 -> Hauppauge WinTV-HVR1100 DVB-T/Hybrid
cx88[0]: card=41 -> Hauppauge WinTV-HVR1100 DVB-T/Hybrid (Low Profile)
cx88[0]: card=42 -> digitalnow DNTV Live! DVB-T Pro
cx88[0]: card=43 -> KWorld/VStream XPert DVB-T with cx22702
cx88[0]: card=44 -> DViCO FusionHDTV DVB-T Dual Digital
cx88[0]: card=45 -> KWorld HardwareMpegTV XPert
cx88[0]: card=46 -> DViCO FusionHDTV DVB-T Hybrid
cx88[0]: card=47 -> pcHDTV HD5500 HDTV
cx88[0]: card=48 -> Kworld MCE 200 Deluxe
cx88[0]: card=49 -> PixelView PlayTV P7000
cx88[0]: card=50 -> NPG Tech Real TV FM Top 10
cx88[0]: card=51 -> WinFast DTV2000 H
cx88[0]: card=52 -> Geniatech DVB-S
CORE cx88[0]: subsystem: 1461:c111, board: UNKNOWN/GENERIC [card=0,autodetected]
TV tuner -1 at 0x1fe, Radio tuner -1 at 0x1fe
cx88[0]/0: found at 0000:00:0f.0, rev: 5, irq: 9, latency: 165, mmio: 0xf0000000
tuner 1-0043: chip found @ 0x86 (cx88[0])
tda9887 1-0043: tda988[5/6/7] found @ 0x43 (tuner)
tuner 1-0060: All bytes are equal. It is not a TEA5767
tuner 1-0060: chip found @ 0xc0 (cx88[0])
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
tuner 1-0060: tuner type not set
cx2388x dvb driver version 0.0.6 loaded
ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
http://www.scyld.com/network/ne2k-pci.html
PCI: Found IRQ 9 for device 0000:00:10.0
PCI: Sharing IRQ 9 with 0000:00:07.2
eth0: RealTek RTL-8029 found at 0x1060, IRQ 9, 00:C0:F0:2B:31:C1.
cx2388x alsa driver version 0.0.6 loaded
PCI: Found IRQ 9 for device 0000:00:0f.1
PCI: Sharing IRQ 9 with 0000:00:0f.0
cx88[0]: card=17 -> DViCO FusionHDTV 3 Gold-Q
cx88[0]: card=18 -> Hauppauge Nova-T DVB-T
cx88[0]: card=19 -> Conexant DVB-T reference design
cx88[0]: card=20 -> Provideo PV259
cx88[0]: card=21 -> DViCO FusionHDTV DVB-T Plus
cx88[0]: card=22 -> pcHDTV HD3000 HDTV
cx88[0]: card=23 -> digitalnow DNTV Live! DVB-T
cx88[0]: card=24 -> Hauppauge WinTV 28xxx (Roslyn) models
cx88[0]: card=25 -> Digital-Logic MICROSPACE Entertainment Center (MEC)
cx88[0]: card=26 -> IODATA GV/BCTV7E
cx88[0]: card=27 -> PixelView PlayTV Ultra Pro (Stereo)
cx88[0]: card=28 -> DViCO FusionHDTV 3 Gold-T
cx88[0]: card=29 -> ADS Tech Instant TV DVB-T PCI
cx88[0]: card=30 -> TerraTec Cinergy 1400 DVB-T
cx88[0]: card=31 -> DViCO FusionHDTV 5 Gold
cx88[0]: card=32 -> AverMedia UltraTV Media Center PCI 550
cx88[0]: card=33 -> Kworld V-Stream Xpert DVD
cx88[0]: card=34 -> ATI HDTV Wonder
cx88[0]: card=35 -> WinFast DTV1000-T
cx88[0]: card=36 -> AVerTV 303 (M126)
cx88[0]: card=37 -> Hauppauge Nova-S-Plus DVB-S
cx88[0]: card=38 -> Hauppauge Nova-SE2 DVB-S
cx88[0]: card=39 -> KWorld DVB-S 100
cx88[0]: card=40 -> Hauppauge WinTV-HVR1100 DVB-T/Hybrid
cx88[0]: card=41 -> Hauppauge WinTV-HVR1100 DVB-T/Hybrid (Low Profile)
cx88[0]: card=42 -> digitalnow DNTV Live! DVB-T Pro
cx88[0]: card=43 -> KWorld/VStream XPert DVB-T with cx22702
cx88[0]: card=44 -> DViCO FusionHDTV DVB-T Dual Digital
cx88[0]: card=45 -> KWorld HardwareMpegTV XPert
cx88[0]: card=46 -> DViCO FusionHDTV DVB-T Hybrid
cx88[0]: card=47 -> pcHDTV HD5500 HDTV
cx88[0]: card=48 -> Kworld MCE 200 Deluxe
cx88[0]: card=49 -> PixelView PlayTV P7000
cx88[0]: card=50 -> NPG Tech Real TV FM Top 10
cx88[0]: card=51 -> WinFast DTV2000 H
cx88[0]: card=52 -> Geniatech DVB-S
CORE cx88[0]: subsystem: 1461:c111, board: UNKNOWN/GENERIC [card=0,autodetected]
TV tuner -1 at 0x1fe, Radio tuner -1 at 0x1fe
cx88[0]/0: found at 0000:00:0f.0, rev: 5, irq: 9, latency: 165, mmio: 0xf0000000
tuner 1-0043: chip found @ 0x86 (cx88[0])
tda9887 1-0043: tda988[5/6/7] found @ 0x43 (tuner)
tuner 1-0060: All bytes are equal. It is not a TEA5767
tuner 1-0060: chip found @ 0xc0 (cx88[0])
cx88[0]/0: registered device video0 [v4l2]
cx88[0]/0: registered device vbi0
tuner 1-0060: tuner type not set
cx2388x dvb driver version 0.0.6 loaded
ne2k-pci.c:v1.03 9/22/2003 D. Becker/P. Gortmaker
http://www.scyld.com/network/ne2k-pci.html
PCI: Found IRQ 9 for device 0000:00:10.0
PCI: Sharing IRQ 9 with 0000:00:07.2
eth0: RealTek RTL-8029 found at 0x1060, IRQ 9, 00:C0:F0:2B:31:C1.
cx2388x alsa driver version 0.0.6 loaded
PCI: Found IRQ 9 for device 0000:00:0f.1
PCI: Sharing IRQ 9 with 0000:00:0f.0
PCI: Sharing IRQ 9 with 0000:00:0f.2
cx88[0]/1: CX88x/0: ALSA support for cx2388x boards
cx2388x blackbird driver version 0.0.6 loaded

-----------------------------------------------------------------

I ran lsmod

-----------------------------------------------------------------

Module Size Used by
autofs4 21124 0
ipv6 248096 12
af_packet 24072 2
nvram 11272 0
dvb_bt8xx 16900 0
nxt6000 10884 1 dvb_bt8xx
sp887x 10884 1 dvb_bt8xx
dst_ca 16000 1 dvb_bt8xx
dst 29320 2 dvb_bt8xx,dst_ca
bt878 12792 2 dvb_bt8xx,dst
bttv 167028 2 dvb_bt8xx,bt878
cx24110 11396 1 dvb_bt8xx
or51211 12932 1 dvb_bt8xx
8250_pnp 12544 0
8250 24708 1 8250_pnp
serial_core 20864 1 8250
parport_pc 39140 0
parport 34504 1 parport_pc
snd_ens1371 24352 0
cx88_blackbird 18052 0
gameport 15368 1 snd_ens1371
cx2341x 13700 1 cx88_blackbird
snd_rawmidi 22944 1 snd_ens1371
snd_seq_device 10508 1 snd_rawmidi
snd_ac97_codec 94116 1 snd_ens1371
snd_ac97_bus 6144 1 snd_ac97_codec
cx88_alsa 13992 1
serio_raw 9348 0
snd_pcm_oss 42912 0
snd_mixer_oss 18176 1 snd_pcm_oss
ne2k_pci 12640 0
snd_pcm 69380 4 snd_ens1371,snd_ac97_codec,cx88_alsa,snd_pcm_oss
cx88_dvb 15108 0
cx8802 13572 2 cx88_blackbird,cx88_dvb
cx88_vp3054_i2c 7808 1 cx88_dvb
mt352 9988 2 dvb_bt8xx,cx88_dvb
dvb_pll 16132 2 dvb_bt8xx,cx88_dvb
or51132 13316 1 cx88_dvb
video_buf_dvb 8580 1 cx88_dvb
dvb_core 73640 3 dvb_bt8xx,dst_ca,video_buf_dvb
tuner 61864 0
nxt200x 16516 1 cx88_dvb
firmware_class 11648 7 dvb_bt8xx,sp887x,bttv,or51211,cx88_blackbird,or51132,nxt200x
isl6421 6016 1 cx88_dvb
zl10353 8708 2 dvb_bt8xx,cx88_dvb
cx24123 15496 1 cx88_dvb
lgdt330x 11676 2 dvb_bt8xx,cx88_dvb
cx22702 9604 1 cx88_dvb
snd_timer 22404 1 snd_pcm
cx8800 31500 1 cx88_blackbird
cx88xx 58916 5 cx88_blackbird,cx88_alsa,cx88_dvb,cx8802,cx8800
ir_common 28420 2 bttv,cx88xx
i2c_algo_bit 12296 3 bttv,cx88_vp3054_i2c,cx88xx
video_buf 23940 8 bttv,cx88_blackbird,cx88_alsa,cx88_dvb,cx8802,video_buf_dvb,cx8800,cx88xx
tveeprom 17296 2 bttv,cx88xx
compat_ioctl32 5248 2 bttv,cx8800
btcx_risc 8072 5 bttv,cx88_alsa,cx8802,cx8800,cx88xx
videodev 24960 4 bttv,cx88_blackbird,cx8800,cx88xx
v4l1_compat 17540 2 cx8800,videodev
v4l2_common 23808 6 bttv,cx88_blackbird,cx2341x,tuner,cx8800,videodev
snd 47588 11 snd_ens1371,snd_rawmidi,snd_seq_device,snd_ac97_codec,cx88_alsa,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
i2c_piix4 11404 0
soundcore 11360 1 snd
i2c_core 20864 22 dvb_bt8xx,nxt6000,sp887x,dst,bttv,cx24110,or51211,cx88_dvb,mt352,dvb_pll,or51132,tuner,nxt200x,isl6421,zl10353,cx24123,lgdt330x,cx22702,cx88xx,i2c_algo_bit,tveeprom,i2c_piix4
snd_page_alloc 11784 1 snd_pcm
uhci_hcd 24204 0
usbcore 111364 2 uhci_hcd
shpchp 35876 0
pci_hotplug 31560 1 shpchp
intel_agp 23324 1
agpgart 29656 1 intel_agp
evdev 11776 1

and lspci -vv

00:00.0 Host bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX Host bridge (rev 02)
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR+
Latency: 64
Region 0: Memory at f8000000 (32-bit, prefetchable) [size=64M]
Capabilities: [a0] AGP version 1.0
Status: RQ=32 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>

00:01.0 PCI bridge: Intel Corporation 440BX/ZX/DX - 82443BX/ZX/DX AGP bridge (rev 02) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap- 66MHz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 128
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
I/O behind bridge: 00009000-00009fff
Memory behind bridge: f3000000-f40fffff
Prefetchable memory behind bridge: 10000000-100fffff
Secondary status: 66MHz+ FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- <SERR- <PERR-
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B+

00:07.0 ISA bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 02)
Control: I/O+ Mem+ BusMaster+ SpecCycle+ MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0

00:07.1 IDE interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01) (prog-if 80 [Master])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Region 4: I/O ports at 1080 [size=16]

00:07.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01) (prog-if 00 [UHCI])
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64
Interrupt: pin D routed to IRQ 9
Region 4: I/O ports at 1040 [size=32]

00:07.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 02)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin ? routed to IRQ 9

00:0c.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 02)
Subsystem: Ensoniq Creative Sound Blaster AudioPCI64V, AudioPCI128
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 96 (3000ns min, 32000ns max)
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at 1000 [size=64]
Capabilities: [dc] Power Management version 1
Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA PME(D0+,D1-,D2+,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0e.0 Multimedia controller: Chromatic Research Inc. Unknown device 0002 (rev 81)
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 0
Interrupt: pin A routed to IRQ 11
Region 0: Memory at e8000000 (32-bit, non-prefetchable) [size=128M]
[virtual] Expansion ROM at 10100000 [disabled] [size=256K]

00:0f.0 Multimedia video controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder (rev 05)
Subsystem: Avermedia Technologies Inc Unknown device c111
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 165 (5000ns min, 13750ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 9
Region 0: Memory at f0000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [44] Vital Product Data
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0f.1 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [Audio Port] (rev 05)
Subsystem: Avermedia Technologies Inc Unknown device c111
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (1000ns min, 63750ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 9
Region 0: Memory at f1000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:0f.2 Multimedia controller: Conexant CX23880/1/2/3 PCI Video and Audio Decoder [MPEG Port] (rev 05)
Subsystem: Avermedia Technologies Inc Unknown device c111
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR+ FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 64 (1500ns min, 22000ns max), Cache Line Size: 32 bytes
Interrupt: pin A routed to IRQ 9
Region 0: Memory at f2000000 (32-bit, non-prefetchable) [size=16M]
Capabilities: [4c] Power Management version 2
Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-

00:10.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8029(AS)
Subsystem: Realtek Semiconductor Co., Ltd. RTL-8029(AS)
Control: I/O+ Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Interrupt: pin A routed to IRQ 9
Region 0: I/O ports at 1060 [size=32]

01:00.0 VGA compatible controller: ATI Technologies Inc 3D Rage Pro AGP 1X/2X (rev 5c) (prog-if 00 [VGA])
Subsystem: ATI Technologies Inc Rage Pro Turbo AGP 2X
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
Latency: 66 (2000ns min), Cache Line Size: 32 bytes
Region 0: Memory at f3000000 (32-bit, non-prefetchable) [size=16M]
Region 1: I/O ports at 9000 [size=256]
Region 2: Memory at f4000000 (32-bit, non-prefetchable) [size=4K]
[virtual] Expansion ROM at 10000000 [disabled] [size=128K]
Capabilities: [50] AGP version 1.0
Status: RQ=256 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit- FW- AGP3- Rate=x1,x2
Command: RQ=1 ArqSz=0 Cal=0 SBA- AGP- GART64- 64bit- FW- Rate=<none>

ok haha this is crazy... and think im posting way to much stuff i find... but i have made some progress, i have download the ivtv drivers although when i run make this is what i get:


i found a link that has helped me alittle bit more, but i am unsure how to install it.

http://kernel.org/git/?p=linux/kernel/g ... c8fabc8212

I'm assuming you're running R5E50 then. See http://mysettopbox.tv/phpBB2/viewtopic.php?t=13281

ok thanks. i ran that and i am still recieving the error message. http://www.knoppmythwiki.org/index.php?page=CompileIvtv i am using this guide and am using ivtv-0.8.1.

OK, so you are on R5E50?

Dang, batting 1000 today. When I first read your post I thought it was complaining about the source directory, not the headers directory. There has been some "fun" going on with the nVidia drivers over here http://mysettopbox.tv/phpBB2/viewtopic.php?t=13443. I am using R5D1 so I don't have any hands-on experience getting the source/headers in sync in R5E50, sorry.

its okay... i am just looking for a fix to this problem

Looks like you need a 2.6.19 kernel and the current release are all on 2.6.18 or earlier... From http://kernelnewbies.org/Linux_2_6_19 under "V4L/DVB":

Link

It looks like it may be able to work if you force the tuner type to 12 (ASUS PVR 416)

i linked that page above. how do i install it?

I believe you force the tuner type this way:

http://www.knoppmythwiki.org/index.php? ... V2000XPdlx

Except you only add:



The instructions for setting it up should be the same.

thank you novellahub, I made the changes.. only adding bttv card=12 but it still does not work.