View unanswered posts    View active topics

Board index Linux General

All times are UTC - 6 hours





Post new topic Reply to topic  Page 2 of 3
  [ 39 posts ] 
Go to page Previous  1, 2, 3  Next
Print view Previous topic   Next topic  
Author Message
Search for:
j0ly
 Post subject:
PostPosted: Tue Apr 10, 2007 6:05 pm 
Offline
Joined: Sat Feb 05, 2005 3:26 pm
Posts: 121
Location: Calgary, Alberta - Canada!
You know, it could be...the only other thing I upgraded was a newer video card...but my box isn't exposed on the net via web....only telnet, on port 443... Hmmm ill turn this all off when I'm home...
Top
 Profile  
 
j0ly
 Post subject:
PostPosted: Tue Apr 10, 2007 6:06 pm 
Offline
Joined: Sat Feb 05, 2005 3:26 pm
Posts: 121
Location: Calgary, Alberta - Canada!
ack double post...

I have disabled ssh access from the outside world. Im thinking for some reason it may be the video card. im going to install the old nvidia drivers and try it again. as well there is no usb devices on the box besides a Command IR
Top
 Profile  
 
mjl
 Post subject:
PostPosted: Tue Apr 10, 2007 7:14 pm 
Offline
Joined: Sun Jun 12, 2005 10:55 pm
Posts: 3161
Location: Warwick, RI
Hi,

If you have a sata port and no sata drive, try disabling it.

Turn off cd monitoring, disable comflagging, etc. Once you get stable, then one by one bring what you need back till you find the one that gives the head ache.

Quote:
only telnet
May as well walk around with your fly open...

Just trying to offer some ideas.
Mike
Top
 Profile  
 
j0ly
 Post subject:
PostPosted: Tue Apr 10, 2007 8:36 pm 
Offline
Joined: Sat Feb 05, 2005 3:26 pm
Posts: 121
Location: Calgary, Alberta - Canada!
lol, nice analogy..... its true, but i have my router blocking all ips except for my works external... so its kinda like having a condom on at least :lol:

ill try disabling those processes, im truly thinking now, that ive spent a good 4 days on this thing im thinking of reinstalling the backend and seeing if that cures it... I have a feeling its a hardware issue, not software..

tjc; Is there a log of what hardware is being hammered at all? sorry not to familiar with linux...
Top
 Profile  
 
j0ly
 Post subject:
PostPosted: Fri Apr 13, 2007 9:20 pm 
Offline
Joined: Sat Feb 05, 2005 3:26 pm
Posts: 121
Location: Calgary, Alberta - Canada!
ok, so, i waited long enough, and decided to do a reinstall of myth... and guess what? ... its doing the same thing... so, heres all the captures ..

ps ax
Quote:
PID TTY STAT TIME COMMAND
1 ? Ss 0:01 init [6]
2 ? S 0:00 [migration/0]
3 ? SN 0:00 [ksoftirqd/0]
4 ? S 0:00 [watchdog/0]
5 ? S 0:00 [migration/1]
6 ? SN 0:00 [ksoftirqd/1]
7 ? S 0:00 [watchdog/1]
8 ? S< 0:00 [events/0]
9 ? S< 0:00 [events/1]
10 ? S< 0:00 [khelper]
11 ? S< 0:00 [kthread]
14 ? S< 0:00 [kblockd/0]
15 ? S< 0:00 [kblockd/1]
16 ? S< 0:00 [kacpid]
107 ? S< 0:00 [kseriod]
215 ? S 0:01 [kswapd0]
216 ? SN 0:00 [kprefetchd]
217 ? S< 0:00 [aio/0]
218 ? S< 0:00 [aio/1]
219 ? S< 0:00 [jfsIO]
220 ? S< 0:00 [jfsCommit]
221 ? S< 0:00 [jfsCommit]
222 ? S< 0:00 [jfsSync]
223 ? S< 0:00 [xfslogd/0]
224 ? S< 0:00 [xfslogd/1]
225 ? S< 0:00 [xfsdatad/0]
226 ? S< 0:00 [xfsdatad/1]
813 ? S< 0:00 [fcached]
910 ? S< 0:00 [ata/0]
911 ? S< 0:00 [ata/1]
930 ? S< 0:00 [kpsmoused]
935 ? S< 0:00 [kcryptd/0]
936 ? S< 0:00 [kcryptd/1]
937 ? S< 0:00 [kmirrord]
938 ? S 0:00 [kirqd]
953 ? D< 0:01 [kjournald]
1329 ? S< 0:00 [khubd]
1686 ? S 0:00 [khpsbpkt]
2777 ? S< 0:00 [kjournald]
2862 ? Ss 0:00 /sbin/portmap
3869 ? Ds 0:00 /sbin/syslogd
3878 ? Ss 0:00 /sbin/klogd
3952 ? S 0:01 [lirc_dev]
4670 ? Ss 0:00 /usr/sbin/sshd
4856 ? S< 0:00 [shpchpd]
5224 ? S< 0:00 [ivtv_vbi/0]
5225 ? S< 0:00 [ivtv_vbi/1]
5241 ? S< 0:00 [msp34xx]
5298 ? S< 0:01 [ivtv-enc]
5299 ? S< 0:24 [ivtv-enc-vbi]
5301 ? S< 0:00 [ivtv_vbi/0]
5302 ? S< 0:00 [ivtv_vbi/1]
5392 ? S< 0:01 [ivtv-enc]
5393 ? S< 2:37 [ivtv-enc-vbi]
5394 ? S< 0:00 [ivtv_vbi/0]
5395 ? S< 0:00 [ivtv_vbi/1]
5411 ? S< 0:00 [msp34xx]
5469 ? S< 0:00 [ivtv-enc]
5470 ? S< 0:01 [ivtv-enc-vbi]
5826 ? S 0:00 /usr/sbin/automount --pid-file=/var/run/autofs/_mnt_a
5860 ? S 0:00 /usr/sbin/automount --pid-file=/var/run/autofs/_var_a
5918 ? SLs 0:00 /usr/sbin/ntpd -p /var/run/ntpd.pid
5927 ? Ss 0:00 /usr/sbin/atd
5938 ? S 0:00 /usr/sbin/ntpd -p /var/run/ntpd.pid
15182 ? Ss 0:00 /usr/bin/gdm
15183 ? S 0:00 /usr/bin/gdm
15190 ? SL 0:27 /usr/X11R6/bin/X :0 -audit 0 -auth /var/lib/gdm/:0.Xa
15225 ? Ss 0:00 x-window-manager
15228 ? Ss 0:18 /usr/bin/x11vnc -nap -wait 50 -displa
15267 ? Ss 0:00 /usr/bin/ssh-agent x-window-manager
15269 ? Ssl 0:24 mythfrontend
27031 ? S 0:00 [pdflush]
24992 ? Ss 0:00 sshd: root@ttyp0
25005 ttyp0 Ss 0:00 -bash
25281 ? Ssl 0:00 /usr/bin/mythbackend --daemon --logfile /var/log/myth
25295 ? Z 0:00 [changechan.sh] <defunct>
25440 ? Ss 0:00 /bin/bash /etc/init.d/rc 6
25721 ? S 0:00 [pdflush]
25722 ttyp0 D+ 0:00 shutdown -r 0 w
25793 ? Ss 0:00 sshd: root@ttyp1
25796 ttyp1 Ss 0:00 -bash
25804 ? S 0:00 /bin/sh /etc/rc6.d/K20ssh stop
25810 ? D 0:00 start-stop-daemon --stop --quiet --oknodo --pidfile /
25816 ttyp1 R+ 0:00 ps ax


top -b
Quote:
root@mbe:~# top -b
top - 09:43:32 up 11:55, 3 users, load average: 4.15, 2.27, 0.98
Tasks: 83 total, 1 running, 81 sleeping, 0 stopped, 1 zombie
Cpu(s): 0.3% us, 0.2% sy, 0.1% ni, 98.3% id, 0.9% wa, 0.1% hi, 0.1% si
Mem: 1032344k total, 784808k used, 247536k free, 86160k buffers
Swap: 1959920k total, 0k used, 1959920k free, 429036k cached

PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
1 root 0 0 164 84 52 S 0.0 0.0 0:01.12 init
2 root RT 0 0 0 0 S 0.0 0.0 0:00.00 migration/0
3 root 0 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/0
4 root RT 0 0 0 0 S 0.0 0.0 0:00.00 watchdog/0
5 root RT 0 0 0 0 S 0.0 0.0 0:00.00 migration/1
6 root 0 19 0 0 0 S 0.0 0.0 0:00.00 ksoftirqd/1
7 root RT 0 0 0 0 S 0.0 0.0 0:00.00 watchdog/1
8 root 0 -5 0 0 0 S 0.0 0.0 0:00.92 events/0
9 root 0 -5 0 0 0 S 0.0 0.0 0:00.02 events/1
10 root 0 -5 0 0 0 S 0.0 0.0 0:00.01 khelper
11 root 0 -5 0 0 0 S 0.0 0.0 0:00.00 kthread
14 root 0 -5 0 0 0 S 0.0 0.0 0:00.40 kblockd/0
15 root 0 -5 0 0 0 S 0.0 0.0 0:00.00 kblockd/1
16 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 kacpid
107 root 14 -5 0 0 0 S 0.0 0.0 0:00.00 kseriod
215 root 4 0 0 0 0 S 0.0 0.0 0:01.65 kswapd0
216 root 39 19 0 0 0 S 0.0 0.0 0:00.00 kprefetchd
217 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 aio/0
218 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 aio/1
219 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 jfsIO
220 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 jfsCommit
221 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 jfsCommit
222 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 jfsSync
223 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 xfslogd/0
224 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 xfslogd/1
225 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 xfsdatad/0
226 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 xfsdatad/1
813 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 fcached
910 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 ata/0
911 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 ata/1
930 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 kpsmoused
935 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 kcryptd/0
936 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 kcryptd/1
937 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 kmirrord
938 root 0 0 0 0 0 S 0.0 0.0 0:00.00 kirqd
953 root 0 -5 0 0 0 D 0.0 0.0 0:01.03 kjournald
1329 root 9 -5 0 0 0 S 0.0 0.0 0:00.00 khubd
1686 root 21 0 0 0 0 S 0.0 0.0 0:00.00 khpsbpkt
2777 root 0 -5 0 0 0 S 0.0 0.0 0:00.80 kjournald
2862 daemon 6 0 1712 364 276 S 0.0 0.0 0:00.00 portmap
3869 root 0 0 1648 636 512 D 0.0 0.1 0:00.08 syslogd
3878 root 0 0 2640 1584 380 S 0.0 0.2 0:00.09 klogd
3952 root 0 0 0 0 0 S 0.0 0.0 0:01.30 lirc_dev
4856 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 shpchpd
5224 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 ivtv_vbi/0
5225 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 ivtv_vbi/1
5241 root 10 -5 0 0 0 S 0.0 0.0 0:00.06 msp34xx
5298 root 0 -10 0 0 0 S 0.0 0.0 0:01.00 ivtv-enc
5299 root 0 -10 0 0 0 S 0.0 0.0 0:24.47 ivtv-enc-vbi
5301 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 ivtv_vbi/0
5302 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 ivtv_vbi/1
5392 root 0 -10 0 0 0 S 0.0 0.0 0:01.44 ivtv-enc
5393 root 0 -10 0 0 0 S 0.0 0.0 2:37.81 ivtv-enc-vbi
5394 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 ivtv_vbi/0
5395 root 15 -5 0 0 0 S 0.0 0.0 0:00.00 ivtv_vbi/1
5411 root 11 -5 0 0 0 S 0.0 0.0 0:00.05 msp34xx
5469 root 0 -10 0 0 0 S 0.0 0.0 0:00.07 ivtv-enc
5470 root 0 -10 0 0 0 S 0.0 0.0 0:01.65 ivtv-enc-vbi
5826 root 0 0 1740 680 568 S 0.0 0.1 0:00.20 automount
5860 root 0 0 1740 672 568 S 0.0 0.1 0:00.20 automount
5918 root 0 0 3376 3376 2688 S 0.0 0.3 0:00.00 ntpd
5927 daemon 9 0 1808 404 296 S 0.0 0.0 0:00.00 atd
5938 root 0 0 3368 1008 328 S 0.0 0.1 0:00.00 ntpd
15182 root 39 0 9272 1496 1060 S 0.0 0.1 0:00.00 gdm
15183 root 0 0 9636 2348 1840 S 0.0 0.2 0:00.04 gdm
15190 root 0 0 60544 44m 6056 S 0.0 4.4 0:27.30 X
15225 mythtv 0 0 8732 4540 3184 D 0.0 0.4 0:00.53 x-window-manage
15228 root 0 0 10464 7660 3716 S 0.0 0.7 0:18.59 x11vnc
15267 mythtv 0 0 3108 524 316 S 0.0 0.1 0:00.00 ssh-agent
15269 mythtv 0 0 167m 60m 19m S 0.0 6.0 0:24.60 mythfrontend
27031 root 0 0 0 0 0 S 0.0 0.0 0:00.10 pdflush
24992 root 0 0 14936 2188 1592 S 0.0 0.2 0:00.08 sshd
25005 root 7 0 4000 2844 1264 S 0.0 0.3 0:00.11 bash
25281 mythtv 13 0 150m 21m 7480 S 0.0 2.1 0:00.81 mythbackend
25295 mythtv 20 0 0 0 0 Z 0.0 0.0 0:00.00 changechan.sh <defunct>
25440 root 22 0 2696 1352 1092 S 0.0 0.1 0:00.01 rc
25721 root 15 0 0 0 0 S 0.0 0.0 0:00.00 pdflush
25722 root 20 0 1804 656 552 D 0.0 0.1 0:00.00 shutdown
25793 root 19 0 14936 2176 1592 S 0.0 0.2 0:00.02 sshd
25796 root 19 0 3992 2812 1240 S 0.0 0.3 0:00.09 bash
25822 root 20 0 2684 1288 1044 S 0.0 0.1 0:00.00 sh
25825 root 20 0 2684 444 200 D 0.0 0.0 0:00.00 sh
25826 root 19 0 2204 1020 764 R 0.0 0.1 0:00.00 top



so now im thinking that this is a hardware issue. Does anyone have any other suggestions of what to look for, BIOS settings i should be warned about? Cheers..
Top
 Profile  
 
razalasm
 Post subject:
PostPosted: Sat Apr 14, 2007 5:56 am 
Offline
Joined: Sat Aug 06, 2005 6:58 pm
Posts: 30
Location: Nokesville, VA
Don't know if this is any help, but:

1) It looks like your machine was in the middle of a reboot when these process listings were captured:
j0ly wrote:
25440 ? Ss 0:00 /bin/bash /etc/init.d/rc 6
25721 ? S 0:00 [pdflush]
25722 ttyp0 D+ 0:00 shutdown -r 0 w
...
25804 ? S 0:00 /bin/sh /etc/rc6.d/K20ssh stop
25810 ? D 0:00 start-stop-daemon --stop --quiet --oknodo --pidfile /
25816 ttyp1 R+ 0:00 ps ax

2) Your process numbers are fairly high.
Quote:
25826 root 19 0 2204 1020 764 R 0.0 0.1 0:00.00 top

If your machine was running for a long time or you quit/restarted X a number of times this is to be expected, otherwise you might have something dieing/restarting in a loop.[/b]
Top
 Profile  
 
j0ly
 Post subject:
PostPosted: Sat Apr 14, 2007 11:45 am 
Offline
Joined: Sat Feb 05, 2005 3:26 pm
Posts: 121
Location: Calgary, Alberta - Canada!
heh, your dead right about the middle of a reboot.... the box becomes so slow that it wot even do a reboot for me, shutdown -r now does nothing.... but finally it went fine, and today, so far, im watching tv.. weird...

-S
Top
 Profile  
 
razalasm
 Post subject:
PostPosted: Sat Apr 14, 2007 1:57 pm 
Offline
Joined: Sat Aug 06, 2005 6:58 pm
Posts: 30
Location: Nokesville, VA
The next time it slows down do a 'dmesg' and see if there's any indication of problems with a disk related subsystem. A few of your processes were in the 'D' state which might indicate they're waiting for I/O completion.
Top
 Profile  
 
j0ly
 Post subject:
PostPosted: Sat Apr 14, 2007 5:43 pm 
Offline
Joined: Sat Feb 05, 2005 3:26 pm
Posts: 121
Location: Calgary, Alberta - Canada!
here is my complete dmesg

Quote:
Linux version 2.6.17-chw-8 (root@mythtv) (gcc version 3.4.4 20050314 (prerelease) (Debian 3.4.3-13)) #1 SMP PREEMPT Sun Jul 30 12:38:47 PDT 2006
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003ff70000 (usable)
BIOS-e820: 000000003ff70000 - 000000003ff7a000 (ACPI data)
BIOS-e820: 000000003ff7a000 - 000000003ff80000 (ACPI NVS)
BIOS-e820: 000000003ff80000 - 0000000040000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff800000 - 0000000100000000 (reserved)
127MB HIGHMEM available.
896MB LOWMEM available.
found SMP MP-table at 000f64f0
On node 0 totalpages: 262000
DMA zone: 4096 pages, LIFO batch:0
Normal zone: 225280 pages, LIFO batch:31
HighMem zone: 32624 pages, LIFO batch:7
DMI present.
ACPI: RSDP (v000 PTLTD ) @ 0x000f65b0
ACPI: RSDT (v001 PTLTD RSDT 0x060400d0 LTP 0x00000000) @ 0x3ff750c7
ACPI: FADT (v001 IBM THINKCEN 0x060400d0 PTL 0x00000001) @ 0x3ff79e9d
ACPI: TCPA (v001 IBM THINKCEN 0x060400d0 PTL 0x00000001) @ 0x3ff79f11
ACPI: MADT (v001 PTLTD APIC 0x060400d0 LTP 0x00000000) @ 0x3ff79f43
ACPI: BOOT (v001 PTLTD $SBFTBL$ 0x060400d0 LTP 0x00000001) @ 0x3ff79fa1
ACPI: SSDT (v001 PTLTD ACPIHT 0x060400d0 LTP 0x00000001) @ 0x3ff79fc9
ACPI: DSDT (v001 IBM THINKCEN 0x060400d0 MSFT 0x0100000e) @ 0x00000000
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
Processor #0 15:2 APIC version 20
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
Processor #1 15:2 APIC version 20
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ9 used by override.
Enabling APIC mode: Flat. Using 1 I/O APICs
Using ACPI (MADT) for SMP configuration information
Allocating PCI resources starting at 50000000 (gap: 40000000:bec00000)
Built 1 zonelists
Kernel command line: auto BOOT_IMAGE=Linux ro root=301 splash=silent apm=power-off nomce
bootsplash: silent mode.
mapped APIC to ffffd000 (fee00000)
mapped IOAPIC to ffffc000 (fec00000)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 16384 bytes)
Detected 2993.102 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1031860k/1048000k available (4215k kernel code, 15580k reserved, 1593k data, 252k init, 130496k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay using timer specific routine.. 5989.11 BogoMIPS (lpj=2994556)
Security Framework v1.0.0 initialized
Mount-cache hash table entries: 512
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000
Checking 'hlt' instruction... OK.
SMP alternatives: switching to UP code
CPU0: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09
SMP alternatives: switching to SMP code
Booting processor 1/1 eip 3000
Initializing CPU#1
Calibrating delay using timer specific routine.. 5984.12 BogoMIPS (lpj=2992061)
CPU: After generic identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: After vendor identify, caps: bfebfbff 00000000 00000000 00000000 00004400 00000000 00000000
CPU: Trace cache: 12K uops, L1 D cache: 8K
CPU: L2 cache: 512K
CPU: Physical Processor ID: 0
CPU: After all inits, caps: bfebfbff 00000000 00000000 00000080 00004400 00000000 00000000
CPU1: Intel(R) Pentium(R) 4 CPU 3.00GHz stepping 09
Total of 2 processors activated (11973.23 BogoMIPS).
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
checking TSC synchronization across 2 CPUs: passed.
Brought up 2 CPUs
migration_cost=1000
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 56k freed
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: PCI BIOS revision 2.10 entry at 0xfd98d, last bus=3
Setting up standard PCI resources
ACPI: Subsystem revision 20060127
ACPI Error (evgpeblk-0284): Unknown GPE method type: NFPB (name not of form _Lxx or _Exx) [20060127]
ACPI: Interpreter enabled
ACPI: Using IOAPIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (0000:00)
PCI: Probing PCI hardware (bus 00)
PCI quirk: region 1000-107f claimed by ICH4 ACPI/GPIO/TCO
PCI quirk: region 1180-11bf claimed by ICH4 GPIO
PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1
Boot video device is 0000:01:00.0
PCI: Transparent bridge - 0000:00:1e.0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.SLOT._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 7 9 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 7 9 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 7 *9 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs *3 4 5 7 9 10 11 12 14 15)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.AGP_._PRT]
Linux Plug and Play Support v0.97 (c) Adam Belay
pnp: PnP ACPI init
pnp: PnP ACPI: found 13 devices
PnPBIOS: Disabled by ACPI PNP
SCSI subsystem initialized
PCI: Using ACPI for IRQ routing
PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Bridge: 0000:00:01.0
IO window: disabled.
MEM window: d2000000-d3ffffff
PREFETCH window: e0000000-e8ffffff
PCI: Bridge: 0000:00:1e.0
IO window: 2000-2fff
MEM window: d4000000-d40fffff
PREFETCH window: ec000000-f7ffffff
PCI: Setting latency timer of device 0000:00:1e.0 to 64
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1572864 bytes)
TCP bind hash table entries: 65536 (order: 7, 786432 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
Simple Boot Flag at 0x35 set to 0x1
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
JFS: nTxBlock = 8063, nTxLock = 64505
SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled
SGI XFS Quota Management subsystem
Initializing Cryptographic API
io scheduler noop registered
io scheduler anticipatory registered (default)
io scheduler deadline registered
io scheduler cfq registered
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize
loop: loaded (max 8 devices)
Intel(R) PRO/1000 Network Driver - version 7.0.33-k2
Copyright (c) 1999-2005 Intel Corporation.
ACPI: PCI Interrupt 0000:03:0b.0[A] -> GSI 16 (level, low) -> IRQ 16
e1000: 0000:03:0b.0: e1000_probe: (PCI:33MHz:32-bit) 00:0d:60:22:67:89
e1000: eth0: e1000_probe: Intel(R) PRO/1000 Network Connection
pcnet32.c:v1.32 18.Mar.2006 tsbogend@alpha.franken.de
e100: Intel(R) PRO/100 Network Driver, 3.5.10-k2-NAPI
e100: Copyright(c) 1999-2005 Intel Corporation
ns83820.c: National Semiconductor DP83820 10/100/1000 driver.
forcedeth.c: Reverse Engineered nForce ethernet driver. Version 0.54.
dmfe: Davicom DM9xxx net driver, version 1.36.4 (2002-01-17)
winbond-840.c:v1.01-d (2.4 port) Nov-17-2001 Donald Becker <becker@scyld.com>
http://www.scyld.com/network/drivers.html
uli526x: ULi M5261/M5263 net driver, version 0.9.3 (2005-7-29)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
ICH5: IDE controller at PCI slot 0000:00:1f.1
PCI: Enabling device 0000:00:1f.1 (0005 -> 0007)
ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 17
ICH5: chipset revision 2
ICH5: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0x1880-0x1887, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0x1888-0x188f, BIOS settings: hdc:DMA, hdd:pio
Probing IDE interface ide0...
hda: ST3200822A, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: ATAPI DVD DD 2X16X4X16, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 512KiB
hda: 390721968 sectors (200049 MB) w/8192KiB Cache, CHS=24321/255/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3
hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
libata version 1.20 loaded.
PNP: PS/2 Controller [PNP0303:KBC] at 0x60,0x64 irq 1
PNP: PS/2 controller doesn't have AUX irq; using default 12
serio: i8042 AUX port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
mice: PS/2 mouse device common for all mice
md: linear personality registered for level -1
md: raid0 personality registered for level 0
md: raid1 personality registered for level 1
md: raid10 personality registered for level 10
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
raid5: automatically using best checksumming function: pIII_sse
pIII_sse : 3732.000 MB/sec
raid5: using function: pIII_sse (3732.000 MB/sec)
raid6: int32x1 773 MB/s
raid6: int32x2 1011 MB/s
input: AT Translated Set 2 keyboard as /class/input/input0
raid6: int32x4 730 MB/s
raid6: int32x8 738 MB/s
raid6: mmxx1 2367 MB/s
raid6: mmxx2 2714 MB/s
raid6: sse1x1 1597 MB/s
raid6: sse1x2 2160 MB/s
raid6: sse2x1 2996 MB/s
raid6: sse2x2 3285 MB/s
raid6: using algorithm sse2x2 (3285 MB/s)
md: raid6 personality registered for level 6
md: multipath personality registered for level -4
md: faulty personality registered for level -5
md: md driver 0.90.3 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: bitmap version 4.39
device-mapper: 4.6.0-ioctl (2006-02-17) initialised: dm-devel@redhat.com
TCP bic registered
NET: Registered protocol family 1
NET: Registered protocol family 15
Starting balanced_irq
Using IPI No-Shortcut mode
Suspend2 Core.
Suspend2 Compression Driver loading.
Suspend2 Encryption Driver loading.
Suspend2 Swap Writer loading.
Suspend2 FileWriter loading.
ACPI wakeup devices:
USB1 USB2 USB3 USB4 USBE SLOT KBC COMA
ACPI: (supports S0 S1 S4 S5)
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
Suspend2 2.2.7.3: You need to use a resume2= command line parameter to tell Suspend2 where to look for an image.
Suspend2 2.2.7.3: Resume2 parameter is empty. Suspending will be disabled.
Suspend2 2.2.7.3: Missing or invalid storage location (resume2= parameter). Please correct and rerun lilo (or equivalent) before suspending.
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda1, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
Freeing unused kernel memory: 252k freed
Adding 1959920k swap on /dev/hda2. Priority:-1 extents:1 across:1959920k
EXT3 FS on hda1, internal journal
megasas: 00.00.02.04 Fri Feb 03 14:31:44 PST 2006
3ware Storage Controller device driver for Linux v1.26.02.001.
3ware 9000 Storage Controller device driver for Linux v2.26.02.007.
Adaptec aacraid driver (1.1-5[2409]-mh1)
usbcore: registered new driver usbfs
usbcore: registered new driver hub
USB Universal Host Controller Interface driver v3.0
ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.0 to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
uhci_hcd 0000:00:1d.0: irq 16, io base 0x00001800
usb usb1: configuration #1 chosen from 1 choice
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 18
PCI: Setting latency timer of device 0000:00:1d.1 to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
uhci_hcd 0000:00:1d.1: irq 18, io base 0x00001820
usb usb2: configuration #1 chosen from 1 choice
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
usb 1-1: new full speed USB device using uhci_hcd and address 2
ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 17
PCI: Setting latency timer of device 0000:00:1d.2 to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1d.2: irq 17, io base 0x00001840
usb usb3: configuration #1 chosen from 1 choice
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usb 1-1: configuration #1 chosen from 1 choice
ACPI: PCI Interrupt 0000:00:1d.3[A] -> GSI 16 (level, low) -> IRQ 16
PCI: Setting latency timer of device 0000:00:1d.3 to 64
uhci_hcd 0000:00:1d.3: UHCI Host Controller
uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001860
usb usb4: configuration #1 chosen from 1 choice
usb 2-2: new low speed USB device using uhci_hcd and address 2
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
ohci_hcd: 2005 April 22 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI)
usb 2-2: configuration #1 chosen from 1 choice
ACPI: PCI Interrupt 0000:00:1d.7[D] -> GSI 23 (level, low) -> IRQ 19
PCI: Setting latency timer of device 0000:00:1d.7 to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
ehci_hcd 0000:00:1d.7: debug port 1
PCI: cache line size of 128 is not supported by device 0000:00:1d.7
ehci_hcd 0000:00:1d.7: irq 19, io mem 0xd0000000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
usb usb5: configuration #1 chosen from 1 choice
usb 2-2: USB disconnect, address 2
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 8 ports detected
usb 1-1: USB disconnect, address 2
ieee1394: Initialized config rom entry `ip1394'
Generic RTC Driver v1.07
ACPI: Power Button (FF) [PWRF]
ACPI: Power Button (CM) [PWRB]
ACPI: Processor [CPU0] (supports 8 throttling states)
ACPI: Processor [CPU1] (supports 8 throttling states)
ACPI: Thermal Zone [THM0] (65 C)
usb 2-2: new low speed USB device using uhci_hcd and address 3
Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled
usb 2-2: configuration #1 chosen from 1 choice
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
usb 1-1: new full speed USB device using uhci_hcd and address 3
parport: PnPBIOS parport detected.
parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
usb 1-1: configuration #1 chosen from 1 choice
Linux agpgart interface v0.101 (c) Dave Jones
agpgart: Detected an Intel 865 Chipset.
agpgart: AGP aperture is 32M @ 0xd6000000
ACPI: PCI Interrupt 0000:00:1f.5[B] -> GSI 17 (level, low) -> IRQ 20
PCI: Setting latency timer of device 0000:00:1f.5 to 64
intel8x0_measure_ac97_clock: measured 71947 usecs
intel8x0: clocking to 48000
NET: Registered protocol family 17
Linux video capture interface: v1.00
bttv: driver version 0.9.16 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
bt878: AUDIO driver version 0.0.0 loaded
saa7146: register extension 'dvb'.
saa7146: register extension 'budget dvb'.
saa7146: register extension 'budget_ci dvb'.
saa7146: register extension 'budget_av'.
usbcore: registered new driver ttusb
usbcore: registered new driver ttusb-dec
usbcore: registered new driver hiddev
input: Logitech USB Receiver as /class/input/input1
input: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.1-2
input: Logitech USB Receiver as /class/input/input2
input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:1d.1-2
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.6:USB HID core driver
NET: Registered protocol family 10
lo: Disabled Privacy Extensions
IPv6 over IPv4 tunneling driver
ttyS1: LSR safety check engaged!
ttyS1: LSR safety check engaged!
kjournald starting. Commit interval 5 seconds
EXT3 FS on hda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
e1000: eth0: e1000_watchdog_task: NIC Link is Up 100 Mbps Full Duplex
/root/commandir-1.4.2/commandir.c: CommandIR USB device now attached to commandir0
/root/commandir-1.4.2/commandir.c: commandir0 reset
/root/commandir-1.4.2/commandir.c: COMMANDIR0:
TX Enabled: 1, 2, 3, 4
RX: commandir0
LCD: commandir0
usbcore: registered new driver commandir
Warning: /proc/ide/hd?/settings interface is obsolete, and will be removed soon!
lirc_dev: IR Remote Control driver registered, at major 61
lirc_dev: lirc_register_plugin: sample_rate: 20
lirc_cmdir: freq set to 38000Hz
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: unable to find recovery directory /var/lib/nfs/v4recovery
NFSD: starting 90-second grace period
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
eth0: no IPv6 routers present
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
hw_random: RNG not detected
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.7.0 (tagged release) loading
ivtv: Linux version: 2.6.17-chw-8 SMP preempt mod_unload 586 gcc-3.4
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
ACPI: PCI Interrupt 0000:03:09.0[A] -> GSI 21 (level, low) -> IRQ 21
ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
saa7115 1-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
msp3400 1-0040: MSP3445G-B8 found @ 0x80 (ivtv i2c driver #0)
msp3400 1-0040: MSP3445G-B8 supports radio, mode is autodetect and autoselect
tveeprom 1-0050: Hauppauge model 32062, rev B185, serial# 2868923
tveeprom 1-0050: tuner model is TCL 2002N 6A (idx 85, type 50)
tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 1-0050: audio processor is MSP3445 (idx 12)
tveeprom 1-0050: decoder processor is SAA7115 (idx 19)
tveeprom 1-0050: has no radio, has IR remote
ivtv0: Corrected autodetection from Hauppauge WinTV PVR-150 to Hauppauge WinTV PVR-250
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02050032
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
tuner 1-0061: type set to 50 (TCL 2002N)
ivtv0: Initialized Hauppauge WinTV PVR-250, card #0
ivtv: ====================== NEXT CARD ======================
ivtv1: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
ACPI: PCI Interrupt 0000:03:0a.0[A] -> GSI 22 (level, low) -> IRQ 22
ivtv1: Unreasonably low latency timer, setting to 64 (was 32)
tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #1)
cx25840 2-0044: cx25841-23 found @ 0x88 (ivtv i2c driver #1)
cx25840 2-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #1)
tveeprom 2-0050: Hauppauge model 26032, rev C199, serial# 7846579
tveeprom 2-0050: tuner model is TCL 2002N 5H (idx 99, type 50)
tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 2-0050: audio processor is CX25841 (idx 35)
tveeprom 2-0050: decoder processor is CX25841 (idx 28)
tveeprom 2-0050: has no radio, has IR remote
ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv1: Encoder revision: 0x02050032
ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv1: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
ivtv1: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
ivtv1: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
tuner 2-0061: type set to 50 (TCL 2002N)
ivtv1: Initialized Hauppauge WinTV PVR-150, card #1
ivtv: ====================== NEXT CARD ======================
ivtv2: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
ACPI: PCI Interrupt 0000:03:0c.0[A] -> GSI 20 (level, low) -> IRQ 23
ivtv2: Unreasonably low latency timer, setting to 64 (was 32)
tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #2)
saa7115 3-0021: saa7115 found @ 0x42 (ivtv i2c driver #2)
msp3400 3-0040: MSP3445G-B8 found @ 0x80 (ivtv i2c driver #2)
msp3400 3-0040: MSP3445G-B8 supports radio, mode is autodetect and autoselect
tveeprom 3-0050: Hauppauge model 32062, rev B185, serial# 2869255
tveeprom 3-0050: tuner model is TCL 2002N 6A (idx 85, type 50)
tveeprom 3-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 3-0050: audio processor is MSP3445 (idx 12)
tveeprom 3-0050: decoder processor is SAA7115 (idx 19)
tveeprom 3-0050: has no radio, has IR remote
ivtv2: Corrected autodetection from Hauppauge WinTV PVR-150 to Hauppauge WinTV PVR-250
ivtv2: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv2: Encoder revision: 0x02050032
ivtv2: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv2: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
ivtv2: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
ivtv2: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
tuner 3-0061: type set to 50 (TCL 2002N)
ivtv2: Initialized Hauppauge WinTV PVR-250, card #2
ivtv: ==================== END INIT IVTV ====================
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8774 Tue Aug 1 20:54:08 PDT 2006
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
Top
 Profile  
 
j0ly
 Post subject:
PostPosted: Sat Apr 14, 2007 11:04 pm 
Offline
Joined: Sat Feb 05, 2005 3:26 pm
Posts: 121
Location: Calgary, Alberta - Canada!
as well, here is an interesting tidbit....

After i reboot the backend.... i have to re-setup my time.... its off by like 4 1/2 hours or so... weird eh.... do you guys think it could be as simple as a cmos battery?
Top
 Profile  
 
mjl
 Post subject:
PostPosted: Sat Apr 14, 2007 11:33 pm 
Offline
Joined: Sun Jun 12, 2005 10:55 pm
Posts: 3161
Location: Warwick, RI
Hi,

The clock is interesting note. There was some combinations of mobo and video card that diddled with the timing and makes the clock go screwy. I for get exactly but a search should bing it up. Solution I think had to with noipc or something.

The *nix family doesn't like the clock being messed with, thats why Cecil has ntpd running.

I always add to my boot this line.

Last in /etc/init.d/bootmisc.sh

ntpdate -u north-america.pool.ntp.org

You will most likely have to apt-get ntpdate :(

Mike
Top
 Profile  
 
razalasm
 Post subject:
PostPosted: Sun Apr 15, 2007 5:36 am 
Offline
Joined: Sat Aug 06, 2005 6:58 pm
Posts: 30
Location: Nokesville, VA
j0ly wrote:
here is my complete dmesg...

I'd still be interested in seeing the last 50 lines of a dmesg listing *while* the machine is acting slow.
Top
 Profile  
 
j0ly
 Post subject:
PostPosted: Sun Apr 15, 2007 5:50 pm 
Offline
Joined: Sat Feb 05, 2005 3:26 pm
Posts: 121
Location: Calgary, Alberta - Canada!
ill post it tonight, thanks everyone for your interest in this... its driving me nuts!
Top
 Profile  
 
rheaj
 Post subject:
PostPosted: Sun Apr 15, 2007 7:27 pm 
Offline
Joined: Sat Feb 25, 2006 8:14 pm
Posts: 5
Location: Rhinebeck, NY
This sounds very similar to what recently happened to me, here's my story in case it might help:

I have a single frontend/backend setup in the family room, no other frontends, everything on one box. It's on a 2.8 GHz Dell GX270. One day a couple of weeks ago, the integrated video chip on the motherboard melted. I swapped the MB out for an identical one out of another GX270 to get myself back up and running. The next day, while my son had been playing some games on the system, it locked up on him. He hard rebooted it. I didn't think much of it, until later the next day, when I noticed that the system was way, way off on the time of day. At 7 something at night, the box thought is was quarter after 3 in the afternoon.

I reset the time, cursed about the shows that didn't record right and went on with life. The next day when I got home from work, I checked the box to make sure it would record a show that evening while we were out. The thing was completely frozen. I had to hard reboot it again. When it came back up, the time was off by several hours again. It appeared as though it just didn't advance the clock and got caught in suspended animation while it was locked up.

The next day, it locked up again, but I found it wasn't really locked, just really slow to respond to anything. I could CTRL-ALT-F1 out and looked at top. CPU was at 100% and the top thread was alternating between mythfilldatabase and pdflush. This kind of behavior went on for days, during which time it seemed the box could not stay running for a whole 24 hours. It wasn't always pegged out ont he CPU either, sometimes top reported little load at all, but it was still barely responsive. Sometimes it was completely unresponsive.

During my troubleshooting, I found that 'free' reported 1.5 GB of RAM, and I knew I had 2 GB. Ah HA! A bad stick of RAM! I opened up the box and started to look for the bad stick, only to find I was wrong. Two sticks that I thought were 512 MB, were actually 256. So I did have only 1.5 GB after all. But, in the process I did reseat all the memory sticks, and the box has been running without a hitch ever since! It's been four days now.

I don't know if you've already tried reseating components, but your symptoms sounded familiar enough, especially the time being off, for me to mention my experience. Good luck!

PS - Many thanks to all KnoppMyth contributors! KnoppMyth rules! My family and I thoroughly enjoy using it, and are very grateful for all your efforts!!
Top
 Profile  
 
j0ly
 Post subject:
PostPosted: Sun Apr 15, 2007 8:10 pm 
Offline
Joined: Sat Feb 05, 2005 3:26 pm
Posts: 121
Location: Calgary, Alberta - Canada!
thank you for sharing your experience, ill re-seat all ram in the box tonight.

here is a copy of my dmesg, the computer is slowed right down. the last line repeated for about 40 lines.

Cheers

Quote:
NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
NFSD: unable to find recovery directory /var/lib/nfs/v4recovery
NFSD: starting 90-second grace period
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
eth0: no IPv6 routers present
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
hw_random: RNG not detected
ivtv: ==================== START INIT IVTV ====================
ivtv: version 0.7.0 (tagged release) loading
ivtv: Linux version: 2.6.17-chw-8 SMP preempt mod_unload 586 gcc-3.4
ivtv: In case of problems please include the debug info between
ivtv: the START INIT IVTV and END INIT IVTV lines, along with
ivtv: any module options, when mailing the ivtv-users mailinglist.
ivtv0: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
ACPI: PCI Interrupt 0000:03:09.0[A] -> GSI 21 (level, low) -> IRQ 21
ivtv0: Unreasonably low latency timer, setting to 64 (was 32)
tuner 1-0061: chip found @ 0xc2 (ivtv i2c driver #0)
saa7115 1-0021: saa7115 found @ 0x42 (ivtv i2c driver #0)
msp3400 1-0040: MSP3445G-B8 found @ 0x80 (ivtv i2c driver #0)
msp3400 1-0040: MSP3445G-B8 supports radio, mode is autodetect and autoselect
tveeprom 1-0050: Hauppauge model 32062, rev B185, serial# 2868923
tveeprom 1-0050: tuner model is TCL 2002N 6A (idx 85, type 50)
tveeprom 1-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 1-0050: audio processor is MSP3445 (idx 12)
tveeprom 1-0050: decoder processor is SAA7115 (idx 19)
tveeprom 1-0050: has no radio, has IR remote
ivtv0: Corrected autodetection from Hauppauge WinTV PVR-150 to Hauppauge WinTV PVR-250
ivtv0: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv0: Encoder revision: 0x02050032
ivtv0: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv0: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
ivtv0: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
ivtv0: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
tuner 1-0061: type set to 50 (TCL 2002N)
ivtv0: Initialized Hauppauge WinTV PVR-250, card #0
ivtv: ====================== NEXT CARD ======================
ivtv1: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
ACPI: PCI Interrupt 0000:03:0a.0[A] -> GSI 22 (level, low) -> IRQ 22
ivtv1: Unreasonably low latency timer, setting to 64 (was 32)
tuner 2-0061: chip found @ 0xc2 (ivtv i2c driver #1)
cx25840 2-0044: cx25841-23 found @ 0x88 (ivtv i2c driver #1)
cx25840 2-0044: loaded v4l-cx25840.fw firmware (16382 bytes)
wm8775 2-001b: chip found @ 0x36 (ivtv i2c driver #1)
tveeprom 2-0050: Hauppauge model 26032, rev C199, serial# 7846579
tveeprom 2-0050: tuner model is TCL 2002N 5H (idx 99, type 50)
tveeprom 2-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 2-0050: audio processor is CX25841 (idx 35)
tveeprom 2-0050: decoder processor is CX25841 (idx 28)
tveeprom 2-0050: has no radio, has IR remote
ivtv1: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv1: Encoder revision: 0x02050032
ivtv1: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv1: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
ivtv1: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
ivtv1: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
tuner 2-0061: type set to 50 (TCL 2002N)
ivtv1: Initialized Hauppauge WinTV PVR-150, card #1
ivtv: ====================== NEXT CARD ======================
ivtv2: Autodetected Hauppauge WinTV PVR-150 card (cx23416 based)
ACPI: PCI Interrupt 0000:03:0c.0[A] -> GSI 20 (level, low) -> IRQ 23
ivtv2: Unreasonably low latency timer, setting to 64 (was 32)
tuner 3-0061: chip found @ 0xc2 (ivtv i2c driver #2)
saa7115 3-0021: saa7115 found @ 0x42 (ivtv i2c driver #2)
msp3400 3-0040: MSP3445G-B8 found @ 0x80 (ivtv i2c driver #2)
msp3400 3-0040: MSP3445G-B8 supports radio, mode is autodetect and autoselect
tveeprom 3-0050: Hauppauge model 32062, rev B185, serial# 2869255
tveeprom 3-0050: tuner model is TCL 2002N 6A (idx 85, type 50)
tveeprom 3-0050: TV standards NTSC(M) (eeprom 0x08)
tveeprom 3-0050: audio processor is MSP3445 (idx 12)
tveeprom 3-0050: decoder processor is SAA7115 (idx 19)
tveeprom 3-0050: has no radio, has IR remote
ivtv2: Corrected autodetection from Hauppauge WinTV PVR-150 to Hauppauge WinTV PVR-250
ivtv2: loaded v4l-cx2341x-enc.fw firmware (262144 bytes)
ivtv2: Encoder revision: 0x02050032
ivtv2: Allocate DMA encoder MPEG stream: 128 x 32768 buffers (4096KB total)
ivtv2: Allocate DMA encoder YUV stream: 194 x 10800 buffers (2048KB total)
ivtv2: Allocate DMA encoder VBI stream: 120 x 17472 buffers (2048KB total)
ivtv2: Allocate DMA encoder PCM audio stream: 455 x 4608 buffers (2048KB total)
tuner 3-0061: type set to 50 (TCL 2002N)
ivtv2: Initialized Hauppauge WinTV PVR-250, card #2
ivtv: ==================== END INIT IVTV ====================
nvidia: module license 'NVIDIA' taints kernel.
ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16
NVRM: loading NVIDIA Linux x86 Kernel Module 1.0-8774 Tue Aug 1 20:54:08 PDT 2006
agpgart: Found an AGP 3.0 compliant device at 0000:00:00.0.
agpgart: Putting AGP V3 device at 0000:00:00.0 into 8x mode
agpgart: Putting AGP V3 device at 0000:01:00.0 into 8x mode
ivtv0 warning: ENC: REG_DMAXFER 2 wait failed
ivtv0 warning: ENC: REG_DMAXFER 2 wait failed
ivtv0 warning: ENC: REG_DMAXFER 2 wait failed
ivtv0 warning: ENC: REG_DMAXFER 2 wait failed
ivtv0 warning: ENC: REG_DMAXFER 2 wait failed
ivtv0 warning: ENC: REG_DMAXFER 2 wait failed
ivtv0 warning: ENC: REG_DMAXFER 2 wait failed
ivtv0 warning: ENC: REG_DMAXFER 2 wait failed
ivtv0 warning: ENC: REG_DMAXFER 2 wait failed
ivtv0 warning: ENC: REG_DMAXFER 2 wait failed
ivtv0 warning: ENC: REG_DMAXFER 2 wait failed
ivtv0 warning: ENC: REG_DMAXFER 2 wait failed
ivtv0 warning: ENC: REG_DMAXFER 2 wait failed
ivtv0 warning: ENC: REG_DMAXFER 2 wait failed
ivtv0 warning: ENC: REG_DMAXFER 2 wait failed
ivtv0 warning: ENC: REG_DMAXFER 2 wait failed
ivtv0 warning: ENC: REG_DMAXFER 2 wait failed
ivtv0 warning: ENC: REG_DMAXFER 2 wait failed
Top
 Profile  
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 2 of 3
  [ 39 posts ] 
Go to page Previous  1, 2, 3  Next


Board index Linux General

All times are UTC - 6 hours




Who is online

Users browsing this forum: No registered users and 4 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group

Theme Created By ceyhansuyu