So i Tried to install it, but after i setting up my Login and my passwords and accept the settings i made the System hangs up or better say bring me back to the bash with this Error :



so can anybody tell me what i must do? I want to test knoppmyth on my PC before i install it on the Box-PC.

My System:
AMD Athlon XP 2600+
1024 MB RAM
Geforce4 TI 4200
Hauppauge WIN TV PVR 350
nforce2 Mainboard from Leadtek
Sound: Terratec Aureon 5.1 Fun

On my PC ist now Win2000 installed. Filesystem is NTFS. My C Partition has 3,15 GB free and totally Space from C is 6,83 GB

Can anybody tell me´how i solve this problem?


Sorry, my englisch is bad...i know it

well that error generally indicates that you are trying to install onto a scsi drive or drives that are on a raid array, the autoinstall does not support this. It can possibly be accomplised using the manual install with some work. See the note in the manual install section of the install doc.

_________________
Have a question search the forum and have a look at the KnoppMythWiki.

Xsecrets

hmmm, i don't have any SCSI HDD or drives that are on a raid arry...the only thing is that my motherboard had an Silicon Image Sil 3112 SATARaid Controller.

But this ist the only thing, no HDD's or CD-ROM are on SCSI or in Raid Array

SATA will do it too. The default knoppmyth autoinstall will only work with onboard primary master. which shows up in linux as /dev/hda anything else will not work and requires manual install.

_________________
Have a question search the forum and have a look at the KnoppMythWiki.

Xsecrets

make sure that your ide hard drive is set to primary master, i had the same error when i first built my box. you can check yourself by using your bios. basically just set whatever hd you want to be the one being installed to primary master, then any other backup hard drives to primary slave. then set the cd/ddvd drive to secondary master/slave. the problem is the disk reading. when it isn't set to primary the myth cant read it