View unanswered posts    View active topics

Board index KnoppMyth Hardware

All times are UTC - 6 hours





Post new topic Reply to topic  Page 1 of 1
  [ 8 posts ] 
Print view Previous topic   Next topic  
Author Message
Search for:
flexoffset
PostPosted: Sat Feb 24, 2007 3:13 pm 
Offline
Joined: Sat Feb 24, 2007 2:11 pm
Posts: 6
I'm at my wits end.

After my 4th try to install Knoppmyth, the NVIDIA splash screen shows up beautifully, then disappears to an 'X' shaped cursor, then the desktop (and even MythTV screens) offsets to the left and it's all jumbled up and appear to be in very low resolution.

I searched the forum and had all 4 or 5 topics discussing rebuilding kernel, merging stuff, unloading NVIDIA drivers, downloading the 41MB new driver, running an install, etc.

I'm a moderate newbie and following them as best I could, I couldn't get much of any of these instructions to work. Not to mention I was trying to go back and forth between all the posts. It's kind of a mess (no offense intended)

Can someone who knows what they're doing PLEASE put the instructions in a digestible format in one source? Also, the KnoppMyth Wiki lists an older version of the NDIVIA driver than the one in these other threads. Which one to use?

I'm trying to go out to my CRT tv via s-video from my NVIDIA 6200 LE
I run a Hauppauge PVR-150 for my input
I'm using a mobo with a via chipset but it's not in the list of affected boards. I've had perfect captures under fedora 6, but I heard Knoppmyth was supposed to be easier to deal with on a daily basis.

If I could just get this dang NVIDIA to load, everything would be perfect. I can see live tv and everything but it is just as jumbled as it can be due to there is no driver for it.

Any assistance is appreciated.
My wife's about ready to kill me.
Top
 Profile  
 
tjc
 Post subject:
PostPosted: Sat Feb 24, 2007 7:43 pm 
Offline
Joined: Thu Mar 25, 2004 11:00 am
Posts: 9551
Location: Arlington, MA
LCD TVs are generally very finicky about exact sync rates. You may want to search for mode lines tailored for that, and make sure you're not trying to run at a resolution it won't support. Also check your X logfile and see if what it's trying to use. http://www.knoppmythwiki.org/index.php?page=CheckingLogFiles
Top
 Profile  
 
flexoffset
 Post subject:
PostPosted: Sun Feb 25, 2007 12:02 am 
Offline
Joined: Sat Feb 24, 2007 2:11 pm
Posts: 6
Thank you.
I went to the link (and their links) and have gotten a pretty good handle on things.

I have created an xsession using my Win XP laptop, Putty, and XMing to see that my Hauppauge PVR-150 is recording video beautifully. (I can see the previews when I log into my Linux box via my XP X session.) That makes it all the more frustrating. I'm one step away and it's a doozie.

Ok. So I typed "more /var/log/Xorg.0.log" to check my X session logs.
It is large and I can't find a way to copy the output using Putty.
Anyway, the brief synopsis is:
It classifies the GeForce 6200 LE correctly as NV44. I've read where it -could- be a NV44A or something but I don't know.

I don't know what to do with the log.
There's a whole lot more info if I could figure how to copy it and paste it.

It seems KnoppMyth is classifying my video card somewhat correctly.
Item #: E145-5182 at tigerdirect.com. I bought it at newegg but I don't have the invoice in front of me.

FWIW, I'm sending VGA out to an actual 17" LCD monitor until I can get the s-video out to work on my Sony TV.
The bitmappy problems on the display are not at all similar to when I have wrong refresh rates or incorrect resolution. I can see the terminal text perfectly. It's the backgrounds, pictures, and video that look like crap.

I have confirmed via the method mentioned at the beginning that the capture is actually good.

I also have an s-video out to a big Sony CRT -- that output is always black when KnoppMyth starts up. It works fine on the bootup, though.

I've come too far to give up, but I don't seem to have the brains to do this last step by myself. I don't want to go back to Fedora but the tuner and video cards worked pretty good there (except the s-video output to the CRT). I really prefer KnoppMyth if I can get it running.

What would be my next step? I've heard of stopping the X window to make changes but I read where it constantly re-seeds and it's impossible to stop it.
Top
 Profile  
 
tjc
 Post subject:
PostPosted: Sun Feb 25, 2007 12:27 am 
Offline
Joined: Thu Mar 25, 2004 11:00 am
Posts: 9551
Location: Arlington, MA
If you have remote access to the box, you can make the changes that way and then just restart the X server.

The things you should be looking for in the X log files are more along the lines of detected attached displays (the EDID/DDC probing results). The idea is to see if it detects the monitor correctly and gets the right resolution and timing information.
Top
 Profile  
 
flexoffset
 Post subject: Logs attached this time.
PostPosted: Sun Feb 25, 2007 9:50 pm 
Offline
Joined: Sat Feb 24, 2007 2:11 pm
Posts: 6
tjc wrote:
If you have remote access to the box, you can make the changes that way and then just restart the X server.

The things you should be looking for in the X log files are more along the lines of detected attached displays (the EDID/DDC probing results). The idea is to see if it detects the monitor correctly and gets the right resolution and timing information.


I have attached the log files for the NVIDIA install, and the Xorg.0.log. Hopefully it will make sense to someone.

In the mean time, I have again followed the instructions to try to load the 8762 nvidia driver prior to launching x-window.
I log in as init 3 and x-window starts up.
I can only log in as init 1 for the terminal window to work (or simply hit the left-shift button and launch from LILO prompt.

Anyway, it doesn't matter since I'm unable to do anything since I get a "no precompiled kernel" error. The nvidia installer tries to find a kernel but it just doesn't work.

I'm in nothing but a perpetual goose chase with this.
All this was done from a fresh install of KnoppMyth off the CD.
I feel like I'm so close to getting this working.
The darn NVIDIA cards were supposed to be "just working" --- that's what everyone said during my research. (shoulda known, though)

Here is the NVIDIA log output:
Code:
nvidia-installer log file '/var/log/nvidia-installer.log'
creation time: Sun Feb 25 21:05:53 2007

option status:
  license pre-accepted    : false
  update                  : false
  force update            : false
  expert                  : false
  uninstall               : false
  driver info             : false
  no precompiled interface: false
  no ncurses color        : false
  query latest driver ver : false
  OpenGL header files     : true
  no questions            : false
  silent                  : false
  no backup               : false
  kernel module only      : false
  sanity                  : false
  add this kernel         : false
  no runlevel check       : false
  no network              : false
  no ABI note             : false
nvidia-installer.log
  no RPMs                 : false
  force tls               : (not specified)
  force compat32 tls      : (not specified)
  X install prefix        : /usr/X11R6
  OpenGL install prefix   : /usr
  compat32 install prefix : (not specified)
  installer install prefix: /usr
  utility install prefix  : /usr
  kernel name             : (not specified)
  kernel include path     : (not specified)
  kernel source path      : (not specified)
  kernel output path      : (not specified)
  kernel install path     : (not specified)
  proc mount point        : /proc
  ui                      : (not specified)
  tmpdir                  : /tmp
  ftp mirror              : ftp://download.nvidia.com
  RPM file list           : (not specified)

Using: nvidia-installer ncurses user interface
-> License accepted.
WARNING: Unable to open the file '/proc/version' (No such file or directory).
-> No precompiled kernel interface was found to match your kernel; this means
   that the installer will need to compile a new kernel interface.
-> Performing CC test with CC="cc".
-> gcc-version-check failed:
   
   
   Could not compile gcc-version-check.c.  Please be sure you have your distrib
   ution's libc development package installed and that 'cc' is a valid C compil
   er name.
   
   If you know what you are doing and want to ignore the gcc version check, sel
   ect "No" to continue installation.  Otherwise, select "Yes" to abort install
   ation, set the CC environment variable to the name of the compiler used to c
   ompile your kernel, and restart installation.  Abort now? (Answer: No)
ERROR: Unable to determine the version of the kernel sources located in
       '/lib/modules/2.6.18-chw-13/build'.  Please make sure you have installed
       the kernel source files for your kernel and that they are properly
       configured; on Red Hat Linux systems, for example, be sure you have the
       'kernel-source' RPM installed.  If you know the correct kernel source
       files are installed, you may specify the kernel source path with the
       '--kernel-source-path' command line option.
ERROR: Installation has failed.  Please see the file
       '/var/log/nvidia-installer.log' for details.  You may find suggestions
       on fixing installation problems in the README available on the Linux
       driver download page at www.nvidia.com.






Here is my Xorg.0.log output.
I'd submit it as a text file but I can't figure how to link to my ftp site so you can download it.

Code:
X Window System Version 7.1.1


Current Operating System: Linux mythtv 2.6.18-chw-13 #1 SMP PREEMPT Build Date: 07 July 2006
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Feb 25 21:27:16 2007
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "XFree86 Configured"
(**) |-->Screen "Screen0" (0)
(**) |   |-->Monitor "Monitor0"
(**) |   |-->Device "Card0"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "USB Mouse"
(II) Bus -1: bridge is at (0:7:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
 (--) PCI: (0:11:0) unknown vendor (0x4444) unknown chipset (0x0016) rev 1, Mem @
  0xe8000000/26
 (--) PCI:*(1:0:0) nVidia Corporation unknown chipset (0x0222) rev 161, Mem @ 0xe
 (II) LoadModule: "dbe"
 (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
 (II) Module dbe: vendor="X.Org Foundation"
         compiled for 7.1.1, module version = 1.0.0
         Module class: X.Org Server Extension
         ABI class: X.Org Server Extension, version 0.3
 (II) Loading extension DOUBLE-BUFFER
 (II) LoadModule: "glx"
 (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
 (II) Module glx: vendor="NVIDIA Corporation"
         compiled for 4.0.2, module version = 1.0.7184
         Module class: XFree86 Server Extension
         ABI class: XFree86 Server Extension, version 0.1
 (II) Loading extension GLX

 (II) NVIDIA X Driver  1.0-7184  Tue Aug  1 18:41:01 PDT 2006
 (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
 (II) Primary Device is: PCI 01:00:0
 (--) Assigning device section with no busID to primary device
 (--) Chipset NVIDIA GPU found
  (II) Setting vga for screen 0.
 (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
 (==) NVIDIA(0): RGB weight 888
 (==) NVIDIA(0): Default visual is TrueColor
 (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
 (--) NVIDIA(0): Linear framebuffer at 0xD0000000
 (--) NVIDIA(0): MMIO registers at 0xEC000000
 (II) NVIDIA(0): NVIDIA GPU detected as: NV44
 (--) NVIDIA(0): VideoBIOS: 05.44.02.45.01
 (--) NVIDIA(0): Interlaced video modes are supported on this GPU
 (II) NVIDIA(0): Detected AGP rate: 4X
 (--) NVIDIA(0): VideoRAM: 262144 kBytes
 (II) NVIDIA(0): Connected display device(s): CRT-0, TV-0
 (WW) NVIDIA(0): Multiple displays connected, but only one display allowed;
 (WW) NVIDIA(0):      using first display
 (--) NVIDIA(0): Display device CRT-0: maximum pixel clock at  8 bpp: 400 MHz
 (--) NVIDIA(0): Display device CRT-0: maximum pixel clock at 16 bpp: 400 MHz
 (--) NVIDIA(0): Display device CRT-0: maximum pixel clock at 32 bpp: 400 MHz
 (II) Loading sub module "ddc"
 (II) LoadModule: "ddc"
 (II) Loading /usr/lib/xorg/modules/libddc.so
 (II) Module ddc: vendor="X.Org Foundation"
         compiled for 7.1.1, module version = 1.0.0
         ABI class: X.Org Video Driver, version 1.0
 (II) Loading sub module "int10"
 (II) LoadModule: "int10"
 (II) Loading /usr/lib/xorg/modules/libint10.so
 (II) Module int10: vendor="X.Org Foundation"
         compiled for 7.1.1, module version = 1.0.0
         ABI class: X.Org Video Driver, version 1.0
 (II) NVIDIA(0): Primary V_BIOS segment is: 0xc000
 (II) NVIDIA(0): Monitor0: Using hsync range of 30.00-81.00 kHz
 (II) NVIDIA(0): Monitor0: Using vrefresh range of 50.00-75.00 Hz
 (II) NVIDIA(0): Clock range:  12.00 to 400.00 MHz
 (II) NVIDIA(0): Not using mode "640x480" (vrefresh out of range)
 (II) NVIDIA(0): Not using mode "640x480" (vrefresh out of range)
 (II) NVIDIA(0): Not using mode "768x576" (vrefresh out of range)
 (II) NVIDIA(0): Not using mode "768x576" (vrefresh out of range)
 (II) NVIDIA(0): Not using mode "800x600" (vrefresh out of range)
 (II) NVIDIA(0): Not using mode "1024x768" (vrefresh out of range)
 (II) NVIDIA(0): Not using mode "1152x864" (vrefresh out of range)
 (WW) (1152x864,Monitor0) mode clock 143.47MHz exceeds DDC maximum 140MHz
 (II) NVIDIA(0): Not using mode "1152x864" (hsync out of range)
 (WW) (1280x960,Monitor0) mode clock 178.99MHz exceeds DDC maximum 140MHz
 (II) NVIDIA(0): Not using mode "1280x960" (hsync out of range)
 (WW) (1280x1024,Monitor0) mode clock 190.96MHz exceeds DDC maximum 140MHz
 (II) NVIDIA(0): Not using mode "1280x1024" (hsync out of range)
 (WW) (1400x1050,Monitor0) mode clock 149.34MHz exceeds DDC maximum 140MHz
 (WW) (1400x1050,Monitor0) mode clock 155.85MHz exceeds DDC maximum 140MHz
 (II) NVIDIA(0): Not using mode "1400x1050" (hsync out of range)
 (WW) (1400x1050,Monitor0) mode clock 179.26MHz exceeds DDC maximum 140MHz
 (II) NVIDIA(0): Not using mode "1400x1050" (hsync out of range)
 (WW) (1400x1050,Monitor0) mode clock 214.39MHz exceeds DDC maximum 140MHz
 (II) NVIDIA(0): Not using mode "1400x1050" (hsync out of range)
 (WW) (1600x1200,Monitor0) mode clock 280.64MHz exceeds DDC maximum 140MHz
 (II) NVIDIA(0): Not using mode "1600x1200" (hsync out of range)
 (WW) (1920x1200,Monitor0) mode clock 193.16MHz exceeds DDC maximum 140MHz
 (II) NVIDIA(0): Not using default mode "640x350" (vrefresh out of range)
 (II) NVIDIA(0): Not using default mode "320x175" (vrefresh out of range)
 (II) NVIDIA(0): Not using default mode "640x400" (vrefresh out of range)
 (II) NVIDIA(0): Not using default mode "320x200" (vrefresh out of range)
 (II) NVIDIA(0): Not using default mode "720x400" (vrefresh out of range)
 (II) NVIDIA(0): Not using default mode "360x200" (vrefresh out of range)
 (II) NVIDIA(0): Not using default mode "320x240" (vrefresh out of range)
 (II) NVIDIA(0): Not using default mode "400x300" (vrefresh out of range)
 (II) NVIDIA(0): Not using default mode "512x384" (vrefresh out of range)
 (II) NVIDIA(0): Not using default mode "512x384" (vrefresh out of range)
 (II) NVIDIA(0): Not using default mode "640x512" (hsync out of range)
 (WW) (1792x1344,Monitor0) mode clock 204.8MHz exceeds DDC maximum 140MHz
 (II) NVIDIA(0): Not using default mode "1792x1344" (hsync out of range)
 (II) NVIDIA(0): Not using default mode "896x672" (hsync out of range)
 (WW) (1792x1344,Monitor0) mode clock 261MHz exceeds DDC maximum 140MHz
 (II) NVIDIA(0): Not using default mode "1792x1344" (hsync out of range)
 (II) NVIDIA(0): Not using default mode "896x672" (hsync out of range)
 (WW) (1856x1392,Monitor0) mode clock 218.3MHz exceeds DDC maximum 140MHz
 (II) NVIDIA(0): Not using default mode "1856x1392" (hsync out of range)
 (II) NVIDIA(0): Not using default mode "928x696" (hsync out of range)
 (WW) (1856x1392,Monitor0) mode clock 288MHz exceeds DDC maximum 140MHz
 (II) NVIDIA(0): Not using default mode "1856x1392" (hsync out of range)
 (WW) (928x696,Monitor0) mode clock 144MHz exceeds DDC maximum 140MHz
 (II) NVIDIA(0): Not using default mode "928x696" (hsync out of range)
 (WW) (1920x1440,Monitor0) mode clock 234MHz exceeds DDC maximum 140MHz
 (II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range)
 (II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
 (WW) (1920x1440,Monitor0) mode clock 297MHz exceeds DDC maximum 140MHz
 (II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range)
 (WW) (960x720,Monitor0) mode clock 148.5MHz exceeds DDC maximum 140MHz
 (II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
 (II) NVIDIA(0): Not using default mode "576x432" (vrefresh out of range)
 (II) NVIDIA(0): Not using default mode "700x525" (hsync out of range)
 (WW) (1680x1050,Monitor0) mode clock 147.14MHz exceeds DDC maximum 140MHz
 (II) NVIDIA(0): Not using default mode "960x600" (hsync out of range)
 (WW) (1920x1440,Monitor0) mode clock 341.35MHz exceeds DDC maximum 140MHz
 (II) NVIDIA(0): Not using default mode "1920x1440" (hsync out of range)
 (WW) (960x720,Monitor0) mode clock 170.675MHz exceeds DDC maximum 140MHz
 (II) NVIDIA(0): Not using default mode "960x720" (hsync out of range)
 (WW) (2048x1536,Monitor0) mode clock 266.95MHz exceeds DDC maximum 140MHz
 (II) NVIDIA(0): Not using default mode "2048x1536" (hsync out of range)
 (WW) (2048x1536,Monitor0) mode clock 340.48MHz exceeds DDC maximum 140MHz
 (II) NVIDIA(0): Not using default mode "2048x1536" (hsync out of range)
 (WW) (2048x1536,Monitor0) mode clock 388.04MHz exceeds DDC maximum 140MHz
 (II) NVIDIA(0): Not using default mode "2048x1536" (hsync out of range)
 (II) NVIDIA(0): Not using mode "1920x1200" (width too large for virtual size)
 (II) NVIDIA(0): Not using default mode "1680x1050" (width too large for virtual
 size)
 (II) NVIDIA(0): Not using mode "1400x1050" (width too large for virtual size)
 (II) NVIDIA(0): Not using mode "1400x1050" (width too large for virtual size)
 (II) NVIDIA(0): Not using mode "1280x1024" (width too large for virtual size)
 (II) NVIDIA(0): Not using default mode "1440x900" (width too large for virtual s
 ize)
 (II) NVIDIA(0): Not using mode "1280x960" (width too large for virtual size)
 (II) NVIDIA(0): Not using mode "1280x960" (width too large for virtual size)
 (II) NVIDIA(0): Not using default mode "1280x800" (width too large for virtual s
 ize)
 (II) NVIDIA(0): Not using default mode "1280x768" (width too large for virtual s
 ize)
 (WW) NVIDIA(0): Not using mode "960x600" (height 1200 is larger than
 (WW) NVIDIA(0):      EDID-specified maximum 1024)
 (WW) NVIDIA(0): Not using mode "840x525" (height 1050 is larger than
 (WW) NVIDIA(0):      EDID-specified maximum 1024)
 (WW) NVIDIA(0): Not using mode "700x525" (height 1050 is larger than
 (WW) NVIDIA(0):      EDID-specified maximum 1024)
 (WW) NVIDIA(0): Not using mode "700x525" (height 1050 is larger than
 (WW) NVIDIA(0):      EDID-specified maximum 1024)
 (WW) NVIDIA(0): Not using mode "700x525" (height 1050 is larger than
 (WW) NVIDIA(0):      EDID-specified maximum 1024)
 (WW) NVIDIA(0): Not using mode "1152x768":
 (WW) NVIDIA(0):   horizontal sync start (1178) not a multiple of 8
 (WW) NVIDIA(0): Not using mode "576x384":
 (WW) NVIDIA(0):   horizontal sync start (589) not a multiple of 8
 (**) NVIDIA(0): Validated modes for display device CRT-0:
 (**) NVIDIA(0):      Mode "1152x864": 108.0 MHz, 67.5 kHz, 75.0 Hz
 (**) NVIDIA(0):      Mode "1024x768": 78.8 MHz, 60.0 kHz, 75.0 Hz
 (**) NVIDIA(0):      Mode "800x600": 49.5 MHz, 46.9 kHz, 75.0 Hz
 (**) NVIDIA(0):      Mode "640x480": 31.5 MHz, 37.5 kHz, 75.0 Hz
 (**) NVIDIA(0):      Mode "1152x864": 81.6 MHz, 53.7 kHz, 60.0 Hz
 (**) NVIDIA(0):      Mode "1024x768": 75.0 MHz, 56.5 kHz, 70.1 Hz
 (**) NVIDIA(0):      Default mode "832x624": 57.3 MHz, 49.7 kHz, 74.6 Hz
 (**) NVIDIA(0):      Mode "800x600": 50.0 MHz, 48.1 kHz, 72.2 Hz
 (**) NVIDIA(0):      Mode "800x600": 40.0 MHz, 37.9 kHz, 60.3 Hz
 (**) NVIDIA(0):      Mode "768x576": 45.5 MHz, 45.1 kHz, 75.0 Hz
 (**) NVIDIA(0):      Mode "768x576": 42.9 MHz, 43.3 kHz, 72.0 Hz
 (**) NVIDIA(0):      Mode "768x576": 35.0 MHz, 35.8 kHz, 60.0 Hz
 (**) NVIDIA(0):      Default mode "640x512": 67.5 MHz, 80.0 kHz, 75.0 Hz (D)
 (**) NVIDIA(0):      Default mode "640x512": 54.0 MHz, 64.0 kHz, 60.0 Hz (D)
 (**) NVIDIA(0):      Default mode "720x450": 54.4 MHz, 56.9 kHz, 60.2 Hz (D)
 (**) NVIDIA(0):      Mode "640x480": 25.2 MHz, 32.1 kHz, 63.1 Hz
 (**) NVIDIA(0):      Default mode "640x400": 41.7 MHz, 49.7 kHz, 60.0 Hz (D)
 (**) NVIDIA(0):      Default mode "576x432": 54.0 MHz, 67.5 kHz, 75.0 Hz (D)
 (**) NVIDIA(0):      Default mode "640x384": 40.1 MHz, 47.7 kHz, 60.1 Hz (D)
 (**) NVIDIA(0):      Default mode "512x384": 39.4 MHz, 60.1 kHz, 75.1 Hz (D)
 (**) NVIDIA(0):      Default mode "512x384": 37.5 MHz, 56.5 kHz, 70.1 Hz (D)
 (**) NVIDIA(0):      Default mode "512x384": 32.5 MHz, 48.4 kHz, 60.0 Hz (D)
 (**) NVIDIA(0):      Default mode "416x312": 28.6 MHz, 49.7 kHz, 74.7 Hz (D)
 (**) NVIDIA(0):      Default mode "400x300": 24.8 MHz, 46.9 kHz, 75.1 Hz (D)
 (**) NVIDIA(0):      Default mode "400x300": 25.0 MHz, 48.1 kHz, 72.2 Hz (D)
 (**) NVIDIA(0):      Default mode "400x300": 20.0 MHz, 37.9 kHz, 60.3 Hz (D)
 (**) NVIDIA(0):      Default mode "400x300": 18.0 MHz, 35.2 kHz, 56.3 Hz (D)
 (**) NVIDIA(0):      Default mode "320x240": 15.8 MHz, 37.5 kHz, 75.0 Hz (D)
 (**) NVIDIA(0):      Default mode "320x240": 15.8 MHz, 37.9 kHz, 72.8 Hz (D)
 (**) NVIDIA(0):      Default mode "320x240": 12.6 MHz, 31.5 kHz, 60.1 Hz (D)
 (II) NVIDIA(0): Virtual screen size determined to be 1152 x 864
 (++) NVIDIA(0): DPI set to (100, 100)
 (II) Loading sub module "fb"
 (II) LoadModule: "fb"
 (II) Loading /usr/lib/xorg/modules/libfb.so
 (II) Module fb: vendor="X.Org Foundation"
         compiled for 7.1.1, module version = 1.0.0
         ABI class: X.Org ANSI C Emulation, version 0.3
 (II) Loading sub module "ramdac"
 (II) LoadModule: "ramdac"
 (II) Loading /usr/lib/xorg/modules/libramdac.so
 (II) Module ramdac: vendor="X.Org Foundation"
         compiled for 7.1.1, module version = 0.1.0
         ABI class: X.Org Video Driver, version 1.0
 (--) Depth 24 pixmap format is 32 bpp
 (II) do I need RAC?  No, I don't.
 
 (II) NVIDIA(0): Setting mode "1152x864"
 (II) Loading extension NV-GLX
 (II) NVIDIA(0): NVIDIA 3D Acceleration Architecture Initialized
 (II) NVIDIA(0): Using the NVIDIA 2D acceleration architecture
 (==) NVIDIA(0): Backing store disabled
 (==) NVIDIA(0): Silken mouse enabled
 (**) Option "dpms" "true"
 (**) NVIDIA(0): DPMS enabled
 (II) Loading extension NV-CONTROL
 (WW) NVIDIA(0): Option "UseEdidDpi" is not used
 (WW) NVIDIA(0): Option "DPI" is not used
 (==) RandR enabled
 (II) Initializing built-in extension MIT-SHM
 (II) Initializing built-in extension XInputExtension
 (II) Initializing built-in extension XTEST
 (II) Initializing built-in extension XKEYBOARD
 (II) Initializing built-in extension XC-APPGROUP
 (II) Initializing built-in extension SECURITY
 (II) Initializing built-in extension XINERAMA
 (II) Initializing built-in extension XFIXES
 (II) Initializing built-in extension XFree86-Bigfont
 (II) Initializing built-in extension RENDER
 (II) Initializing built-in extension RANDR
 (II) Initializing built-in extension COMPOSITE
 (II) Initializing built-in extension DAMAGE
 (II) Initializing built-in extension XEVIE
 (II) Initializing extension GLX
 


-- edited to reduce clutter ---


Last edited by flexoffset on Mon Feb 26, 2007 8:22 am, edited 2 times in total.
Top
 Profile  
 
flexoffset
PostPosted: Sun Feb 25, 2007 10:11 pm 
Offline
Joined: Sat Feb 24, 2007 2:11 pm
Posts: 6
Here is my xorg.conf file as well.

Code:
Section "ServerLayout"
   Identifier     "XFree86 Configured"
   Screen      0  "Screen0" 0 0
   InputDevice    "Keyboard0" "CoreKeyboard"
# PS/2 Mouse not detected
# Serial Mouse not detected
        InputDevice    "USB Mouse" "CorePointer"
EndSection

Section "ServerFlags"
   Option "AllowMouseOpenFail"  "true"
   
EndSection

Section "Files"
   RgbPath      "/usr/share/X11/rgb"
   ModulePath   "/usr/lib/xorg/modules"
   FontPath     "/usr/share/fonts/X11/misc:unscaled"
   FontPath     "/usr/share/fonts/X11/75dpi:unscaled"
   FontPath     "/usr/share/fonts/X11/100dpi:unscaled"
   FontPath     "/usr/share/fonts/X11/Type1"
   FontPath     "/usr/share/fonts/X11/Speedo"
   FontPath     "/usr/share/fonts/X11/PEX"
# Additional fonts: Locale, Gimp, TTF...
   FontPath     "/usr/share/fonts/X11/cyrillic"
#   FontPath     "/usr/share/fonts/X11/latin2/75dpi"
#   FontPath     "/usr/share/fonts/X11/latin2/100dpi"
# True type and type1 fonts are also handled via xftlib, see /etc/X11/XftConfig!
   FontPath     "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType"
   FontPath     "/usr/share/fonts/truetype"
   FontPath     "/usr/share/fonts/latex-ttf-fonts"
EndSection

Section "Module"
# Comments: see http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=346408
   Load  "dbe" # Double Buffering Extension, very important.
#   Load  "dri" # This shouldn't be available choice if user has selected driver vga, vesa or nv.
   Load  "glx" # GLX Extension.
   Load  "freetype" # Freetype fonts.
   Load  "type1"  # Type 1 fonts
   Load  "record" # Developer extension, usually not needed
#   Load  "extmod" # This is okay, but if you look into "man xorg.conf" you'll find option NOT to include DGA extension with extmod, and for a good reason.. DGA causes instability as it access videoram without consulting X about it.
   SubSection      "extmod"
      Option          "omit xfree86-dga"
   EndSubSection
#   Load  "speedo" # Speedo fonts, this module doesn't exist in Xorg 7.0.17
# The following are deprecated/unstable/unneeded in Xorg 7.0
#       Load  "ddc"  # ddc probing of monitor, this should be never present, as it gets automatically loaded.
#   Load  "GLcore" # This should be never present, as it gets automatically loaded.
#       Load  "bitmap" # Should be never present, as it gets automatically loaded. This is a font module, and loading it in xorg.conf makes X try to load it twice.
EndSection

Section "InputDevice"
   Identifier  "Keyboard0"
   Driver      "kbd"
        Option      "CoreKeyboard"
   Option "XkbRules" "xorg"
   Option "XkbModel" "pc105"
   Option "XkbLayout" "us"

EndSection

Section "InputDevice"
   Identifier  "Serial Mouse"
   Driver      "mouse"
   Option      "Protocol" "Microsoft"
   Option      "Device" "/dev/ttyS0"
   Option      "Emulate3Buttons" "true"
   Option      "Emulate3Timeout" "70"
   Option       "SendCoreEvents"  "true"
EndSection

Section "InputDevice"
   Identifier  "PS/2 Mouse"
   Driver      "mouse"
   Option      "Protocol" "auto"
Option          "ZAxisMapping"          "4 5"
   Option      "Device" "/dev/psaux"
   Option      "Emulate3Buttons" "true"
   Option      "Emulate3Timeout" "70"
   Option       "SendCoreEvents"  "true"
EndSection

Section "InputDevice"
        Identifier      "USB Mouse"
        Driver          "mouse"
        Option          "Device"                "/dev/input/mice"
   Option      "SendCoreEvents"   "true"
        Option          "Protocol"              "IMPS/2"
        Option          "ZAxisMapping"          "4 5"
        Option          "Buttons"               "5"
EndSection

# Auto-generated by KNOPPIX mkxf86config

Section "Monitor"
   Identifier   "Monitor0"
   Option   "DPMS"   "true"
   Option "UseEdidDpi" "FALSE"
   Option "DPI" "100 x 100"
   VendorName   "SMA"
   ModelName   "SMA0c62"
   HorizSync 30 - 81 # DDC-probed
   VertRefresh  50.0 - 75.0 # Very conservative. May flicker.
#   VertRefresh  50.0 - 62.0 # Extreme conservative. Will flicker. TFT default.
   # These are the DDC-probed settings reported by your monitor.
   # 1280x1024, 75.0Hz; hfreq=79.98, vfreq=75.03
   ModeLine "1280x1024"   135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync
   # 1152x864, 75.0Hz; hfreq=67.50, vfreq=75.00
   ModeLine "1152x864"   108.00 1152 1216 1344 1600  864  865  868  900 +hsync +vsync
   # 1024x768, 75.0Hz; hfreq=60.02, vfreq=75.03
   ModeLine "1024x768"    78.75 1024 1040 1136 1312  768  769  772  800 +hsync +vsync
   # 1024x768, 70.0Hz; hfreq=56.48, vfreq=70.07
   ModeLine "1024x768"    75.00 1024 1048 1184 1328  768  771  777  806 -hsync -vsync
   # 800x600, 75.0Hz; hfreq=46.88, vfreq=75.00
   ModeLine "800x600"    49.50  800  816  896 1056  600  601  604  625 +hsync +vsync
   # 800x600, 72.0Hz; hfreq=48.08, vfreq=72.19
   ModeLine "800x600"    50.00  800  856  976 1040  600  637  643  666 +hsync +vsync
   # 800x600, 60.0Hz; hfreq=37.88, vfreq=60.32
   ModeLine "800x600"    40.00  800  840  968 1056  600  601  605  628 +hsync +vsync
   # 640x480, 75.0Hz; hfreq=37.50, vfreq=75.00
   ModeLine "640x480"    31.50  640  656  720  840  480  481  484  500 -hsync -vsync
   # 640x480, 72.0Hz; hfreq=37.86, vfreq=72.81
   ModeLine "640x480"    31.50  640  656  696  816  480  481  484  504 -hsync -vsync
   # 640x480, 60.0Hz; hfreq=31.47, vfreq=59.94
   ModeLine "640x480"    25.17  640  648  744  784  480  482  484  509 -hsync -vsync
   # Extended modelines with GTF timings
   # 640x480 @ 100.00 Hz (GTF) hsync: 50.90 kHz; pclk: 43.16 MHz
   ModeLine "640x480"  43.16  640 680 744 848  480 481 484 509  -HSync +Vsync
   # 768x576 @ 60.00 Hz (GTF) hsync: 35.82 kHz; pclk: 34.96 MHz
   ModeLine "768x576"  34.96  768 792 872 976  576 577 580 597  -HSync +Vsync
   # 768x576 @ 72.00 Hz (GTF) hsync: 43.27 kHz; pclk: 42.93 MHz
   ModeLine "768x576"  42.93  768 800 880 992  576 577 580 601  -HSync +Vsync
   # 768x576 @ 75.00 Hz (GTF) hsync: 45.15 kHz; pclk: 45.51 MHz
   ModeLine "768x576"  45.51  768 808 888 1008  576 577 580 602  -HSync +Vsync
   # 768x576 @ 85.00 Hz (GTF) hsync: 51.42 kHz; pclk: 51.84 MHz
   ModeLine "768x576"  51.84  768 808 888 1008  576 577 580 605  -HSync +Vsync
   # 768x576 @ 100.00 Hz (GTF) hsync: 61.10 kHz; pclk: 62.57 MHz
   ModeLine "768x576"  62.57  768 816 896 1024  576 577 580 611  -HSync +Vsync
   # 800x600 @ 100.00 Hz (GTF) hsync: 63.60 kHz; pclk: 68.18 MHz
   ModeLine "800x600"  68.18  800 848 936 1072  600 601 604 636  -HSync +Vsync
   # 1024x768 @ 100.00 Hz (GTF) hsync: 81.40 kHz; pclk: 113.31 MHz
   ModeLine "1024x768"  113.31  1024 1096 1208 1392  768 769 772 814  -HSync +Vsync
   # 1152x864 @ 60.00 Hz (GTF) hsync: 53.70 kHz; pclk: 81.62 MHz
   ModeLine "1152x864"  81.62  1152 1216 1336 1520  864 865 868 895  -HSync +Vsync
   # 1152x864 @ 85.00 Hz (GTF) hsync: 77.10 kHz; pclk: 119.65 MHz
   ModeLine "1152x864"  119.65  1152 1224 1352 1552  864 865 868 907  -HSync +Vsync
   # 1152x864 @ 100.00 Hz (GTF) hsync: 91.50 kHz; pclk: 143.47 MHz
   ModeLine "1152x864"  143.47  1152 1232 1360 1568  864 865 868 915  -HSync +Vsync
   # 1280x960 @ 72.00 Hz (GTF) hsync: 72.07 kHz; pclk: 124.54 MHz
   ModeLine "1280x960"  124.54  1280 1368 1504 1728  960 961 964 1001  -HSync +Vsync
   # 1280x960 @ 75.00 Hz (GTF) hsync: 75.15 kHz; pclk: 129.86 MHz
   ModeLine "1280x960"  129.86  1280 1368 1504 1728  960 961 964 1002  -HSync +Vsync
   # 1280x960 @ 100.00 Hz (GTF) hsync: 101.70 kHz; pclk: 178.99 MHz
   ModeLine "1280x960"  178.99  1280 1376 1520 1760  960 961 964 1017  -HSync +Vsync
   # 1280x1024 @ 100.00 Hz (GTF) hsync: 108.50 kHz; pclk: 190.96 MHz
   ModeLine "1280x1024"  190.96  1280 1376 1520 1760  1024 1025 1028 1085  -HSync +Vsync
   # 1400x1050 @ 60.00 Hz (GTF) hsync: 65.22 kHz; pclk: 122.61 MHz
   ModeLine "1400x1050"  122.61  1400 1488 1640 1880  1050 1051 1054 1087  -HSync +Vsync
   # 1400x1050 @ 72.00 Hz (GTF) hsync: 78.77 kHz; pclk: 149.34 MHz
   ModeLine "1400x1050"  149.34  1400 1496 1648 1896  1050 1051 1054 1094  -HSync +Vsync
   # 1400x1050 @ 75.00 Hz (GTF) hsync: 82.20 kHz; pclk: 155.85 MHz
   ModeLine "1400x1050"  155.85  1400 1496 1648 1896  1050 1051 1054 1096  -HSync +Vsync
   # 1400x1050 @ 85.00 Hz (GTF) hsync: 93.76 kHz; pclk: 179.26 MHz
   ModeLine "1400x1050"  179.26  1400 1504 1656 1912  1050 1051 1054 1103  -HSync +Vsync
   # 1400x1050 @ 100.00 Hz (GTF) hsync: 111.20 kHz; pclk: 214.39 MHz
   ModeLine "1400x1050"  214.39  1400 1512 1664 1928  1050 1051 1054 1112  -HSync +Vsync
   # 1600x1200 @ 100.00 Hz (GTF) hsync: 127.10 kHz; pclk: 280.64 MHz
   ModeLine "1600x1200"  280.64  1600 1728 1904 2208  1200 1201 1204 1271  -HSync +Vsync
   # 1920x1200 @ 60.00 Hz (GTF)  hsync: 74.52; pclk: 193.16 MHz
   Modeline "1920x1200" 193.16  1920 2048 2256 2592  1200 1201 1204 1242  -HSync +HSync
EndSection

Section "Device"
   ### Available Driver options are:-
# sw_cursor is needed for some ati and radeon cards
   #Option     "sw_cursor"
        #Option     "hw_cursor"
        #Option     "NoAccel"
        #Option     "ShowCache"
        #Option     "ShadowFB"
        #Option     "UseFBDev"
        #Option     "Rotate"
   Identifier  "Card0"
# The following line is auto-generated by KNOPPIX mkxf86config
   Driver      "nvidia"
   VendorName  "All"
   BoardName   "All"
#   BusID       "PCI:1:0:0"
EndSection

Section "Screen"
   Identifier "Screen0"
   Device     "Card0"
   Monitor    "Monitor0"
   DefaultColorDepth 24
   SubSection "Display"
      Depth     1
      Modes "1152x864" "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth     4
      Modes "1152x864" "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth     8
      Modes "1152x864" "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth     15
      Modes "1152x864" "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth     16
      Modes "1152x864" "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth     24
      Modes "1152x864" "1024x768" "800x600" "640x480"
   EndSubSection
   SubSection "Display"
      Depth     32
      Modes "1152x864" "1024x768" "800x600" "640x480"
   EndSubSection
EndSection

Section "DRI"
   Mode 0666
EndSection
Top
 Profile  
 
tjc
 Post subject:
PostPosted: Sun Feb 25, 2007 10:46 pm 
Offline
Joined: Thu Mar 25, 2004 11:00 am
Posts: 9551
Location: Arlington, MA
You're confusing things by plugging in two screens. You either need to reduce this to one or go to a twinview setup. I suggested the simpler single monitor solution.

BTW - We really didn't need all of the X log output, the PCI details are almost totally irrelevant in this case.
Top
 Profile  
 
flexoffset
PostPosted: Mon Feb 26, 2007 7:10 pm 
Offline
Joined: Sat Feb 24, 2007 2:11 pm
Posts: 6
Thanks for the suggestion
The background and video show no improvement.

For the time being, I'm done with KnoppMyth.
It's been a terrible disappointment for me.
I'm just not experienced enough with Linux to get it working, I guess.
I acknowledge that.

When we can burn a DVD to create KnoppMyth I'll come back and give it another shot.

Till then....
I'm going back to Fedora.
I can't believe it, but it's easier to work with MythTv for me.
I actually has all the tools available (even though it's on 5 CDs)

Thanks for your time and information. I sincerely appreciate it.
Top
 Profile  
 

Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 8 posts ] 


Board index KnoppMyth Hardware

All times are UTC - 6 hours




Who is online

Users browsing this forum: No registered users and 11 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group

Theme Created By ceyhansuyu